Page 1 of 1
Combo Switch Wiring Diagram to 93 MX3 - Please Help
Posted: October 9th, 2007, 6:29 pm
by Babymx3
Ok...first I did look at the Wiring diagrams that are online.
Second...they list a 95 and looking at the harness from the steering colum...the wires DO NOT MATCH.
In fact they are in different locations in the harnes and different colors.
Im hoping someone on here has the wiring diagrams to a 1993 Mazda MX3 4Cylinder.
I need the wiring diagrams to the steering colum and combo switches.
Anyone can point me in the right direction?
I need to know what the pin outs are
Thansks
Posted: October 10th, 2007, 9:31 am
by Mooneggs
oops I don't have my 92 BETM at work today... it should have the wiring diagrams in it cause 92-93 are the same... I'll see if Tunes has his later today...
Posted: October 10th, 2007, 12:15 pm
by Tunes67
Sorry.. dont have mine with me today either. God I sound like such a nerd. Makes it seem like I carry these shop manuals with me everywhere LOL I'll bring it with me to work tomorrow in case Mooneggs forgets his
Tunes67
Posted: October 10th, 2007, 4:13 pm
by Mooneggs
Tunes67 wrote:Sorry.. dont have mine with me today either. God I sound like such a nerd. Makes it seem like I carry these shop manuals with me everywhere LOL I'll bring it with me to work tomorrow in case Mooneggs forgets his
Tunes67
LOL I AM a nerd then cause I have mine in my car almost every day or I keep it in my desk at work
just for situations like this...
I can't believe I was unprepared today.... wow
Posted: October 12th, 2007, 3:55 pm
by Babymx3
anyone remember to bring theirs?
lol
Posted: October 12th, 2007, 4:02 pm
by Tunes67
Sorry Baby
I promise.. when I get home tonight I will scan the page(s) for you. PM me an e-mail address and I will send the pages off to you before I crash for the night.
Tunes67
Posted: October 12th, 2007, 4:32 pm
by shameem
Posted: October 12th, 2007, 5:39 pm
by Tunes67
Here I will host it on my FTP so you dont have to worry about it not being available.
Click Here to Download
Tunes67
Posted: October 18th, 2007, 5:35 pm
by Babymx3
Thanks guys.
But do you have like the shop manual format one?
Simular to the one online here on this forum but for a 93?
Reason I ask is I FINALLY got my steering wheel off and was looking at the wire connector things that plug into each other and trying to compare it to the pinout sheet of the online manual and the colors of the wires and locations dont match...
Im I reading it wrong or is there a big difference in wire color and wire locations in the plugs for the 93 vs the 95?
Posted: October 24th, 2007, 7:26 pm
by Blazianenigma
There is a difference.
I noticed on my 93 RS.
So, I didnt use the manual thats online via the forum.
I just went to the Dealer and asked for a copy of the wiring diagrams for the turn and wiper circuits.
Ill see if I still have the copy laying around somewhere
Posted: October 25th, 2007, 11:31 am
by Mooneggs
I looked through the BETM and I really could not find where the plugs are... I did see some in the Horn section...
OK i wrote myself a note, I'll bring the entire manual tomorrow and try to scan the whole thing in...
Posted: October 25th, 2007, 4:12 pm
by Babymx3
Mooneggs wrote:I looked through the BETM and I really could not find where the plugs are... I did see some in the Horn section...
OK i wrote myself a note, I'll bring the entire manual tomorrow and try to scan the whole thing in...
It looks like the section in the one online like page z-74
Labeled Turn and Hazard Warning Lights and z-66 headlights.
Posted: October 26th, 2007, 6:13 pm
by Mooneggs
well I brought it to work and started scanning stuff in... I scanned in w, and z1-z4 and I think it has what you need... BUT I don't have your email address... I can send it to you monday cause I do not have the internet on weekends...