MX-3.com

OK well ive spent the last hour trying to finds this, and I know I should have paid more attention cuz I saw it before somewhere, but anyway, Cold air intakes, what ones fit, like will such and such types of cars fit ours, all the ones on fleebay are for the 4 cylinders, do they work? I heard something about the integra's will work. Anyhelp would be great.

I didnt bother getting any specific one.. I went for one that was the right diameter and had all the proper adapter sleeves.. I cant remember what one it was.. possibly integra.. maybe accord.. dont remember.. but it was dirt cheap $35 shipped off of ebay.. then I picked up a couple of reducers for the MAF.. and then I will just cut it as needed to get it to go where I want. I suppose you could spend a lot of money and get one that is already fitted.. PRM makes one I think... Upto you

Tunes67

Its the 1990-1993 Integra intake.

I got a bolt-in CAI for the Mx-3 from http://www.probestore.co.uk

Works very nice, and looks a lot better than the stock plastic from the VAF to the throttle body

-n

Remember that the diameter needs to be the right size for your motor. Many of the CAIs are too large for a stock MX motor. I wouldn't go larger than a 2.5" pipe.

i like my 90-93 integra, works fine on my klze, very loud when you get the rpm's high, its 2.75" and i find it perfect, people say i should switch to a 3" but its fine, shouldn't be any bigger than the bore of the throtle body.

You can get a KLDE cai from ebay. all you need is to cut the elboy where the filter goes and turn it 180 degrees and use a rubber coupler and it fits right into your fender well. Costed me around hmm 60 dllrs shipped. If you need pics or instructions let me know. Also the acura one works pretty well.

theres that kinda whole how -to i did tahts stickied in this forum!?

Integra CAI you will need to do some cutting though

Juans_93_MX3 wrote:Integra CAI you will need to do some cutting though

I ordered this one today, do I need any extra couplers or any extra parts, any surprises other than cutting.

i got mine from toucan industries, they make CAI for both the 4cyl and 6cyl. they have a store in scarborough, i can check for you if u want..

gota link?

Red Rocket wrote:

Juans_93_MX3 wrote:Integra CAI you will need to do some cutting though

I ordered this one today, do I need any extra couplers or any extra parts, any surprises other than cutting.

assuming its the one everyone always gets, you will need a coupler for the MAF to the piping. 2.75" to 3" or something like that. definitely look it up, dont hold me to it

I need to know so that I can order one with the kit, as the shop doesnt carry any. HELP

These are the ones I used.. cheap and you get a spare...

Click Here

Tunes67