Page 1 of 1
PROBE GT MTX in '95 MX3 GS PRECIDIA
Posted: April 11th, 2007, 7:17 pm
by b3atbxr
what is the axle situation in swaping a probe gt 5spd trans into an ATX MX3 GS? i realize the probe axles are bigger in size so my question lies w/ the input side of the axle into the trans on both sides.. my assumption is that i will need a hybrid axle w/ the probe inner cv(to trans) and mx3 outer(hubs)?
Posted: April 11th, 2007, 7:55 pm
by atlantamx3
use mx-3 mtx axles.
Posted: April 11th, 2007, 8:21 pm
by b3atbxr
so the spline count and size of the mx3 mtx axle will fit in the probe gt mtx? cuz the atx axle wasnt nearly big enough when i tried it..
Posted: April 11th, 2007, 8:29 pm
by Tunes67
The ATX axles are different than the MTX axles.. the MTX ones should work just fine.
Tunes67
Posted: April 12th, 2007, 1:16 pm
by 2RotorsNaDream
Just use the MTX MX-3 axles. The Probe GT tranny is the same exact tranny as the MX-3 V6 tranny.
year
Posted: April 30th, 2007, 5:03 pm
by b3atbxr
does the year make a difference?
Posted: April 30th, 2007, 5:03 pm
by b3atbxr
its a 95 car w/ 92 probe gt tranny
Posted: May 1st, 2007, 1:21 am
by mx3autozam
if its a 92 probe then the tranny won't fit because thats a 1st gen probe and there totally different
Posted: May 1st, 2007, 3:15 am
by b3atbxr
its the 2nd gen body maybe i misspoke it is a 93 gt w/ v6