Page 1 of 1
where to buy a turbo oil feed line?
Posted: September 28th, 2006, 7:42 pm
by all8up
hey guys, I need an oil feed line for a 1.6 DOHC, vj-11 turbo, where can I get one, or get one made up?? thanks, in advance!!
Posted: September 28th, 2006, 10:35 pm
by JWMotorsports
Hey, sent you a reply...sorry to take so long!
Posted: September 29th, 2006, 7:20 pm
by Boris
I'm curious about this one too, actually
Posted: September 30th, 2006, 12:39 am
by JWMotorsports
I checking into it. I'll have to go look at my SOHC block and see if it is missing the oil and water ports on the front side of the block near the tranny. The B6T & BP engines come with them stock. The non turbo BPs have plugs in them....their even the same thread pitches on both engines! The MX-3 1.6L DOHC I was told doesn't have them there and has to be run off the head or teed off the oil pressure sensor port....same thing the Honda guys do. I've been around the DSM guys long enough that I really don't advise pulling oil from the cyl. head. The oil pressure sensor is directly on a main oil gally and will give you the freshest oil feed.
Posted: October 1st, 2006, 9:31 am
by all8up
mines a 94 rs DOHC and it has no plugs up front by the trubo.... I like the idea of coming off the sending unit for fresh oil... it is 1/8th pipe thread... the turbo has a weird thread size like 10 mm? would like to run 4 an line and adapt to the trubo somehow...