A friend of mine is getting on my nerves
-
- Senior Member
- Posts: 2220
- Joined: October 17th, 2004, 2:01 am
- Location: SLC, Utah
A friend of mine is getting on my nerves
He talks about how much faster his 96 Talon (non-turboed) is then my car even though we havent raced
I do admit to him, that his car is faster but when I put in the 5speed swap I am going to put him back on his place
But still, he thinks his car is fast. For christ sakes, it only has 140hp and 130ft torque. 2nd gen Toyota Celicas have that same amount of power but they get it earlier at like 3-4k RPMs, not only that, they weigh like 150lbs less, yet they still run 16.1 at the 1/4mile.
His car, just like my car is slow
I am going to get him good because I havent told him I am going to change the engine
Everyone who I race, I'm going to be like "oh yeah, still the stock 1.8L K8 dude, 130hp and 115ft torque", "oh man, you couldnt beat my turd"? "it only has 130hp"
LSD tranny and KLZE, here I come
I do admit to him, that his car is faster but when I put in the 5speed swap I am going to put him back on his place
But still, he thinks his car is fast. For christ sakes, it only has 140hp and 130ft torque. 2nd gen Toyota Celicas have that same amount of power but they get it earlier at like 3-4k RPMs, not only that, they weigh like 150lbs less, yet they still run 16.1 at the 1/4mile.
His car, just like my car is slow
I am going to get him good because I havent told him I am going to change the engine
Everyone who I race, I'm going to be like "oh yeah, still the stock 1.8L K8 dude, 130hp and 115ft torque", "oh man, you couldnt beat my turd"? "it only has 130hp"
LSD tranny and KLZE, here I come
2008 Mazda 3
1993 MX3 GS
KLZE, Fidanza flywheel, KL31 CAMs, South Bend Stage I Clutch, Pacesetter STS, SS AutoChromes, Magnaflow muffler, 2.25' Exhaust, CAI, Blaster Coil HEI, KLDE Valvetrain, 5 Speed Swap
1993 MX3 GS
KLZE, Fidanza flywheel, KL31 CAMs, South Bend Stage I Clutch, Pacesetter STS, SS AutoChromes, Magnaflow muffler, 2.25' Exhaust, CAI, Blaster Coil HEI, KLDE Valvetrain, 5 Speed Swap
- solo_ryder
- Senior Member
- Posts: 6289
- Joined: October 16th, 2004, 2:01 am
- Location: British Columbia
Re: A friend of mine is getting on my nerves
You getting axles for that thing? I hope your racing him on the track.Juans_93_MX3 wrote:LSD tranny and KLZE, here I come
Just remind him that those 4g63 motors are peices of junk and they always run funny, maybe get him to rev it up and his little motor will get crankwalk and you will be the one making fun oh him
![Surprised :o](./images/smilies/icon_surprised.gif)
-
- Senior Member
- Posts: 2220
- Joined: October 17th, 2004, 2:01 am
- Location: SLC, Utah
Re: A friend of mine is getting on my nerves
Track, closed area, almost the same thingsolo_ryder wrote:You getting axles for that thing? I hope your racing him on the track.Juans_93_MX3 wrote:LSD tranny and KLZE, here I come
Just remind him that those 4g63 motors are peices of junk and they always run funny, maybe get him to rev it up and his little motor will get crankwalk and you will be the one making fun oh him
From what i understand its a jspec tranny from a mazda lantis so normal K8 MTX axels should work on it
2008 Mazda 3
1993 MX3 GS
KLZE, Fidanza flywheel, KL31 CAMs, South Bend Stage I Clutch, Pacesetter STS, SS AutoChromes, Magnaflow muffler, 2.25' Exhaust, CAI, Blaster Coil HEI, KLDE Valvetrain, 5 Speed Swap
1993 MX3 GS
KLZE, Fidanza flywheel, KL31 CAMs, South Bend Stage I Clutch, Pacesetter STS, SS AutoChromes, Magnaflow muffler, 2.25' Exhaust, CAI, Blaster Coil HEI, KLDE Valvetrain, 5 Speed Swap
- fieromx3
- Supporting Member
- Posts: 2743
- Joined: June 27th, 2005, 7:58 pm
- Location: Guelph, ontario
- Contact:
yea ud definitly beat him with a standard K8.. i HATE guys like that y do they feels the need they gotta be faster than their friends and everyone else? 4G63 engine are not junk they may not be really reliable but id take that thing over any KL engine or BPT engine anyday and crank walk is not a prob on the 1990-1992.5 years mitsubishi switched the crank to a 7 bolt in 1992 half way thru that year and that is the engine that is prone to crankwalk and it still rarly happens...
Last edited by fieromx3 on August 17th, 2006, 12:16 am, edited 1 time in total.
93' MX-3 GS-ZE
14.4 @ 96.7
14.5 @ 97.2
14.4 @ 96.7
14.5 @ 97.2
-
- Senior Member
- Posts: 6451
- Joined: June 19th, 2004, 2:01 am
- Location: El Paso Tx U.S
- Contact:
LET ME AT HIM .. LET ME AT HIM my kf would tear him a new one
and i dont like my engine lol
![Smile :)](./images/smilies/icon_smile.gif)
-hec
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
- solo_ryder
- Senior Member
- Posts: 6289
- Joined: October 16th, 2004, 2:01 am
- Location: British Columbia
- happyclown
- Regular Member
- Posts: 316
- Joined: July 18th, 2004, 2:01 am
- Location: Vermont
- Contact:
Since i've moved closer to the bigger city Ive noticed that nonturbo eclipses are very very popular. Half of them are owned by cockey guys who think they s--- gold, then the other half are riced out chicks with nice kits and neon lights.
fieromx3 only... shhhh don't tell anyone! ![Rolling Eyes :roll:](./images/smilies/icon_rolleyes.gif)
You must miss your talon... Take a look at what I've been hiding for the past couple of monthsfieromx3 wrote:got any pix of them? tsi awd? id like to see the pixany mods done to them? taken to the track?
![Twisted Evil :twisted:](./images/smilies/icon_twisted.gif)
![Rolling Eyes :roll:](./images/smilies/icon_rolleyes.gif)
1993 RS Teal
-
- Senior Member
- Posts: 2220
- Joined: October 17th, 2004, 2:01 am
- Location: SLC, Utah
You guys think i can beat him in the K8?
KLZE will tear him up a new one
I'll run circles around his car while I beat him
KLZE will tear him up a new one
I'll run circles around his car while I beat him
2008 Mazda 3
1993 MX3 GS
KLZE, Fidanza flywheel, KL31 CAMs, South Bend Stage I Clutch, Pacesetter STS, SS AutoChromes, Magnaflow muffler, 2.25' Exhaust, CAI, Blaster Coil HEI, KLDE Valvetrain, 5 Speed Swap
1993 MX3 GS
KLZE, Fidanza flywheel, KL31 CAMs, South Bend Stage I Clutch, Pacesetter STS, SS AutoChromes, Magnaflow muffler, 2.25' Exhaust, CAI, Blaster Coil HEI, KLDE Valvetrain, 5 Speed Swap
- solo_ryder
- Senior Member
- Posts: 6289
- Joined: October 16th, 2004, 2:01 am
- Location: British Columbia