k8 heads..
Posted: June 17th, 2005, 1:26 am
i cant post on the buy/sell section for some reason?? but i was wondering if anyone had a set of k8 heads for sale.. preferably 92.. but if there is no difference then any year. thanks alot.
Page 1 of 1
Posted: June 17th, 2005, 7:01 am
You have to have 30 posts to post in the for sale forum. I'm almost there with this one.
Posted: June 17th, 2005, 8:13 am
I have one Brand spanking new rear K8 head. I don't know if that does you any good without the front but I do have one. It is Mint. Go to the thread about 6 boxes of parts here
Posted: June 17th, 2005, 12:42 pm
I could pull the heads off the parts car I have but shipping is gonna be a b***h
Posted: June 17th, 2005, 12:55 pm
I have 2 ZE heads coming from Bakersfeild CA, to Whitby ON and it cost $40 per head.bmwm3guy wrote:I could pull the heads off the parts car I have but shipping is gonna be a b***h
so PQ to TN cant be much more.
Have you checked the wreckers??
For what you are gonna have to spend on heads, gaskets kit...blah blah, you might be better off getting a used Probe GT engine (prob like $500) or better yet a KLZE (around $1200)
g/l
Posted: June 17th, 2005, 12:57 pm
I have a set and u may be close to me.. send me a PM
Posted: June 17th, 2005, 5:01 pm
This is on ONPOC:
FordRacer
n00b1e
Posted: Sat Jun 11, 2005 7:38 pm Post subject: FS: KLZE motor. complete.
Post subject: FS: KLZE motor. complete.
--------------------------------------------------------------------------------
... and by klze I really mean KL-03.
... and by complete I really mean 'missing a shitload of stuff'
Compression tested at 180 psi + on all clyinders (dry cranked).
Incudes but is not limited to; block, heads, intake manifold, exhaust manifolds, Mazda valve cover(s), oil pan, pistons, camshafts, flux capacitor etc, etc, etc.
Missing: disty, some accessories.
$best offar.
-if it doesn't sell, i'll strip it for spare parts and take it to a recyclers.
-you pick up.
-available as of next weekend (June 18th-19th)
-etc etc etc
-again... $best offar.
I bet you could snag it up cheap, he is in Ottawa.
FordRacer
n00b1e
Posted: Sat Jun 11, 2005 7:38 pm Post subject: FS: KLZE motor. complete.
Post subject: FS: KLZE motor. complete.
--------------------------------------------------------------------------------
... and by klze I really mean KL-03.
... and by complete I really mean 'missing a shitload of stuff'
Compression tested at 180 psi + on all clyinders (dry cranked).
Incudes but is not limited to; block, heads, intake manifold, exhaust manifolds, Mazda valve cover(s), oil pan, pistons, camshafts, flux capacitor etc, etc, etc.
Missing: disty, some accessories.
$best offar.
-if it doesn't sell, i'll strip it for spare parts and take it to a recyclers.
-you pick up.
-available as of next weekend (June 18th-19th)
-etc etc etc
-again... $best offar.
I bet you could snag it up cheap, he is in Ottawa.
Posted: June 17th, 2005, 10:45 pm
I have a stock K8 with approximately 110,000 miles..and i am looking to get rid of the whole engine cheap.
PS. I just shipped a set of KLZE heads and they costs me about $55 for both heads to ship from California to East coast (can't remember the city or state right now)
PS. I just shipped a set of KLZE heads and they costs me about $55 for both heads to ship from California to East coast (can't remember the city or state right now)
Posted: June 18th, 2005, 11:28 am
I have a pair with cams for immediate sale....Make an offer
Posted: June 23rd, 2005, 4:51 pm
I sent you a private message. I'm in Nashville and have pretty much anything you need.... if you didnt get it or care to discuss, then email me privately at georgechicken@yahoo.com
Daniel
Daniel