[WTB] MILLENIA INTAKE MANIFOLD AND THROTTLE BODY

kp2t · Post by **kp2t** » May 31st, 2005, 8:37 pm

Subject really sums it up, I have a klze but I need the manifold and throttle body

dewthis · Post by **dewthis** » June 2nd, 2005, 8:25 pm

I've got one, where are you located? Would like to get $225 plus shipping. THis is off a ZE with the KL 68 TB. Let me know.

chertel · Post by **chertel** » June 3rd, 2005, 9:55 pm

If he is not interested or has already bought it I would be interested, email me at chrishertel96@msn.com

jschrauwen · Post by **jschrauwen** » June 4th, 2005, 1:06 am

He's currently using the K8 IM and TB and lives in the Toronto/Oakville area.

jschrauwen · Post by **jschrauwen** » June 7th, 2005, 6:25 pm

http://cgi.ebay.com/ebaymotors/ws/eBayI ... gory=36474

chertel · Post by **chertel** » June 9th, 2005, 2:45 pm

the one on ebay is just the intake manifold. The one for sale here is intake manifold and throttle body. Which is a better deal? 149.99us on ebay or the one here?

chertel · Post by **chertel** » June 9th, 2005, 3:08 pm

Can i use the throttle body from the intake manifold that is on my k8?

bmwm3guy · Post by **bmwm3guy** » June 9th, 2005, 3:31 pm

chertel wrote:Can i use the throttle body from the intake manifold that is on my k8?

Yes, but the K8 TB is only 55mm IIRC so it will be a bit of a bottleneck until you find a ZE TB (KL68).

Post by **Custommx3** » June 9th, 2005, 4:41 pm

LOL, the ebay one was dirty.. they just wire brushed the outside of it.. and its a "47" exact same "47" I have.. it came from a US millenia.

chertel · Post by **chertel** » June 9th, 2005, 4:52 pm

I am leaning towards buying it, one fifety us isnt bad even though its off a us millenia. Is there even a big difference from a eunos manifold and a us manifold?

chertel · Post by **chertel** » June 15th, 2005, 1:34 pm

Does anyone have an idea of what customs might be from usa to canada? Just curious and thought someone on here from canada might have bought something from ebay in the usa.
thanx.

jschrauwen · Post by **jschrauwen** » June 17th, 2005, 12:24 am

chertel wrote:Does anyone have an idea of what customs might be from usa to canada? Just curious and thought someone on here from canada might have bought something from ebay in the usa.
thanx.

Can't remember correctly, I think 7%????. Remember that vendors in the US don't charge tax, so that gets collected at the border. So in Ontario we have 7% + 8% (provincial and GST tax) plus 7% (customs/duty) plus brokerage fees (UPS - expensive, Canada Post - $5.00cdn flat rate no matter the value). Add it all up......then decide if it's worth it for you.

Spinkx79 · Post by **Spinkx79** » June 17th, 2005, 1:13 pm

Ask the seller to put a low declared value, $40 or so, should help with the fees.

Here is a UPS example.

I bought the ARP stud kit on PT, cost me $625 CAD, i had him put a declared value of $100.

I paid $18.94 for GST, $38.40 Broker Fee, $2.69 Brokerage GST.

So when it showed up i had a COD of $60.03

If he had put the total amount, i would have paid out the a--.

g/l

p.s. Have you looked on ONPOC or K-Series?

jschrauwen · Post by **jschrauwen** » November 9th, 2005, 8:46 pm

Krish, this won't last long. Looks like a good deal to me. Perhaps there's room for dickering.

http://forums.probetalk.com/showthread.php?t=1701178402

$150.00 is a good deal. Halfway there after this.

PS: You should let Mike know that he should monitor your Probetalk thread closer. There's been some activity with no responses and it looks like one may have got discouraged and gave up. Better still, why not register there yourself, it's only a BB?

chertel · Post by **chertel** » November 10th, 2005, 5:09 pm

I have the same manifold but it came without fuel rails. Can I use the fuel rails from my stock k8 manifold or the ones on the straight neck ze?When I get it.
Still looking for a kl 68 or 47tb?

MX-3.com

[WTB] MILLENIA INTAKE MANIFOLD AND THROTTLE BODY

[WTB] MILLENIA INTAKE MANIFOLD AND THROTTLE BODY

Shipping