Quick Question.....

V6 Technical/Performance Discussions
Post Reply
rdawg000
Regular Member
Posts: 97
Joined: June 11th, 2004, 2:01 am
Location: K-Town
Contact:
Contact rdawg000

Quick Question.....

Post by rdawg000 »

What are the torque specifications for the bolts on the front valve cover??????
Top
hgallegos915
Senior Member
Posts: 6451
Joined: June 19th, 2004, 2:01 am
Location: El Paso Tx U.S
Contact:
Contact hgallegos915

Post by hgallegos915 »

I dont know but not to high, thos bolts break easily if you over do it.
-hec

MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
Top
User avatar
jschrauwen
Forum Moderator
Posts: 6052
Joined: September 27th, 2003, 2:01 am
Location: Frankford, Ontario, Canada
Contact:
Contact jschrauwen

Post by jschrauwen »

What does the on-line manual say?
'92 GS-ZE - sold, '95 GS - sold, '02 Protege LX - Daughter, '00 Audi A4 2.8 QTip, Ducati TT2
Image
90 JDM RHD 300ZX TT - 572.1 RWHP | 590.0 RWTQ | 21 PSI | Pump gas
Top
User avatar
neutral
Supporting Member
Posts: 1770
Joined: December 27th, 2004, 10:19 am
Location: U.S. Mid Atlantic

Post by neutral »

Check out page B2-100 of the online shop manual. The torque specs are very low so be careful, stay within spec and tighten the bolts in a crossing pattern working from the centermost bolts toward the outside-ends of the cover.
Image -Jim
Top
Post Reply

Return to “V6 Technical/Performance”