atx to mtx swap question
Posted: May 2nd, 2005, 3:21 pm
im doin an auto to manual swap. i got every thing hooked up and i get nothing. everything else electrical seems to work. just not the starter. any suggestions on what ive done wrong.
MX-3.com
The Worlds First and Largest Mazda MX-3 Forums
http://mx-3.com/phpbb3/
atx to mtx swap question
Page 1 of 1
Posted: May 2nd, 2005, 10:11 pm
Yes ! you need to wire up the clutch switch with 2 , 12 guage wires going to it, right now they go to the big orange ATX connector, get some 12 guage wire and extend them thru the firewall to the top switch on the clutch and your car will start
Posted: May 2nd, 2005, 11:24 pm
JWMX3 wrote:Yes ! you need to wire up the clutch switch with 2 , 12 guage wires going to it, right now they go to the big orange ATX connector, get some 12 guage wire and extend them thru the firewall to the top switch on the clutch and your car will start
aww... joseph's got a new friend!!
Posted: May 2nd, 2005, 11:31 pm
good_glory wrote:JWMX3 wrote:Yes ! you need to wire up the clutch switch with 2 , 12 guage wires going to it, right now they go to the big orange ATX connector, get some 12 guage wire and extend them thru the firewall to the top switch on the clutch and your car will start
aww... joseph's got a new friend!!
