Page 1 of 2

I let there be light!!

Posted: June 8th, 2003, 3:42 pm
by The_Great_Tonge
This:
Image<p>Plus this:
Image<p>Equal this:
Image<p>I love my HID's!!

Re: I let there be light!!

Posted: June 8th, 2003, 4:49 pm
by JasonH
Those look bright. Are they high and low beam? Do they work well? Are they difficult to adjust? How much were they and where did you get them?<p>Thanks,
Jason

Re: I let there be light!!

Posted: June 8th, 2003, 5:57 pm
by mx3man83
Turn your outside house lights off and take a picture, its hard to tell how good the HID's are.

Re: I let there be light!!

Posted: June 8th, 2003, 6:06 pm
by millionflame
No projectors = ****ty HIDs.<p>Rebased D2S bulbs in reflectors = ****ty HIDs.<p>You got the money to pay the police when you're pulled over for that???<p>I sure hope you do, because there is a reason kits like these are illegal.<p>~A

Re: I let there be light!!

Posted: June 8th, 2003, 7:18 pm
by The_Great_Tonge
Thanks fr the positive comments guy, oh ya Aiden suck my left nut :D Ill Try to take another picture tonight in a better setting. The lights are aimed down and are fine to drive with. Drove by a many cops last night(saw 2 fast 2 furious, big up to JadeMx!!) and nothing happened. Oh ya its not a kit, its the actual HID unit of a GS 300, so dont go runnin ya mouth into something you dont know about, sucka!!

Re: I let there be light!!

Posted: June 8th, 2003, 11:00 pm
by DJPRO
The_Great_Tonge, there are always going to be h8trs like Aiden. I'm almost positive he will say something stupid in reply. That's how he is.
Anyways, congrat's on your finished project. <p>a fellow MX'er with HID's
deeImage

Re: I let there be light!!

Posted: June 9th, 2003, 12:59 am
by Andrew_Pakula
How much did the HID kit cost?

Re: I let there be light!!

Posted: June 9th, 2003, 2:23 am
by millionflame
<blockquote><font size="1" face="Verdana, Arial">quote:</font><hr>Originally posted by The_Great_Tonge:
Thanks fr the positive comments guy, oh ya Aiden suck my left nut :D Ill Try to take another picture tonight in a better setting. The lights are aimed down and are fine to drive with. Drove by a many cops last night(saw 2 fast 2 furious, big up to JadeMx!!) and nothing happened. Oh ya its not a kit, its the actual HID unit of a GS 300, so dont go runnin ya mouth into something you dont know about, sucka!!<hr></blockquote><p>Running my mouth on something I don't know about???<p>Excuse me!!! I know more than you on lighting a--hole. Apart from Taras, I probably know the most on this board, so shove it.<p>And, if they're aimed down, what's the point in having them? You get no advantage in that. Plus, you only have a low beam now, which is not useful for anything else than city driving.<p>~A

Re: I let there be light!!

Posted: June 9th, 2003, 2:26 am
by millionflame
<blockquote><font size="1" face="Verdana, Arial">quote:</font><hr>Originally posted by DJPRO:
The_Great_Tonge, there are always going to be h8trs like Aiden. I'm almost positive he will say something stupid in reply. That's how he is.
Anyways, congrat's on your finished project.
<hr></blockquote><p>I'm a hater??? Riiiiiiight!!!<p>Why would I be hating on him if I have ACTUAL HID units in my bedroom right now??? Two Hella Bi-Xenon projector units (HIGH AND LOW BEAM) with D2S 4100K bulbs (most light you can get), and Hella ballasts.<p>Just because what I say is the TRUTH and it hurts you people because you wasted your money on crap, doesn't mean it's stupid.<p>My lights will destroy both of yours ANY DAY!<p>I DARE you to prove me wrong.<p>~A

Re: I let there be light!!

Posted: June 9th, 2003, 2:54 am
by Mnemonic
if there not using true HID lighting then, I guess they dont have to worry about getting tickets at any rate your an a$$ for giving negative comments with out support to why.
Congrads The Great Tongue at least now you'll finally be able to see cause we all know how ****ty the original lighting is on the mx3s<p>i myself would be going for the HID conversion But ive already waiting on the projectors barrys doing

Re: I let there be light!!

Posted: June 9th, 2003, 6:10 pm
by millionflame
<blockquote><font size="1" face="Verdana, Arial">quote:</font><hr>Originally posted by Mnemonic:
if there not using true HID lighting then, I guess they dont have to worry about getting tickets at any rate your an a$$ for giving negative comments with out support to why.
Congrads The Great Tongue at least now you'll finally be able to see cause we all know how ****ty the original lighting is on the mx3s<p>i myself would be going for the HID conversion But ive already waiting on the projectors barrys doing
<hr></blockquote><p>They SHOULD worry about getting tickets because of the fact that's it NOT actual HID lights. The bulbs thenselves may be D2S bulbs, but are in fact re-based on 9004 bases, which is highly illegal.<p>Reason being? Halogen lights are designed for ONE specific halogen bulb type and you can mix and match them at will. The angles of the mirror like plastic, the lense, the whole shape of the assembly is based on the characteristics of the filament(s) in the bulb.<p>Sure The Great Tongue will get "better light than stock" - whoo hoo that's not hard! - but it's still nothing compared to actual D2S bulbs being put into the proper projector.<p>~A

Re: I let there be light!!

Posted: June 9th, 2003, 7:01 pm
by DJPRO
Image Aiden Image LOL, you are funny. Lets take our lights to the race track and see who gets smoked.Image <p>later,
deeImage

Re: I let there be light!!

Posted: June 9th, 2003, 7:17 pm
by JJ
lolz hahahaha yo TGT where you at???

Re: I let there be light!!

Posted: June 9th, 2003, 9:56 pm
by The_Great_Tonge
<blockquote><font size="1" face="Verdana, Arial">quote:</font><hr>Originally posted by Aiden:
<p>They SHOULD worry about getting tickets because of the fact that's it NOT actual HID lights. The bulbs thenselves may be D2S bulbs, but are in fact re-based on 9004 bases, which is highly illegal.<p>Reason being? Halogen lights are designed for ONE specific halogen bulb type and you can mix and match them at will. The angles of the mirror like plastic, the lense, the whole shape of the assembly is based on the characteristics of the filament(s) in the bulb.<p>Sure The Great Tongue will get "better light than stock" - whoo hoo that's not hard! - but it's still nothing compared to actual D2S bulbs being put into the proper projector.<p>~A<hr></blockquote><p>hmmmm....maybe you didnt read that i got them from a gs 300, meaning it is not a "kit". it is an actually HID bulb with ballast. also when i said aimed down i mean at level, not shooting all over the place and in all types or weird angles. so take the stick that someone stuck up ur *** out and beat yourself with it. and yes u are a haer, a big fat hater!!! :D you might have the bulbs in ya room but they aint in ur car hater. hater hater hater!!! haha stupid hater, all you have on this board are negative comments, all hatin *** comments. big fater hater. hmmm i used the word hater alot didint i you mother f$%kin hater!! ;)
if you are sone educated on this whole light subject, why dont you do something positive and give some feedback. if need projector lights why dont you help barry(custom mx3) with the design of them. i mean damn you could be as smart as hell but with an attitude like urs ill tell you to suck my left nut many times. oh ya ur a hater and you stink!! :p

Re: I let there be light!!

Posted: June 9th, 2003, 11:16 pm
by curtklze
<blockquote><font size="1" face="Verdana, Arial">quote:</font><hr>Originally posted by Aiden:
No projectors = ****ty HIDs.<p>Rebased D2S bulbs in reflectors = ****ty HIDs.<p>You got the money to pay the police when you're pulled over for that???<p>I sure hope you do, because there is a reason kits like these are illegal.<p>~A<hr></blockquote><p>
I have a simple calm question, why did you post this.
After reading everything I dont under stand why you posted this negative post.<p>can you please respond and explaine.
thanks.