Page 1 of 1
Struts for H&R springs
Posted: January 14th, 2004, 1:35 pm
by drift
I just ordered my H&R springs, and now I need to get some struts to match them. I know the zx2 struts are made for eibach springs, but would they be my best choice? What other would be good choices?
Re: Struts for H&R springs
Posted: January 14th, 2004, 1:42 pm
by ProtegeSTS
Re: Struts for H&R springs
Posted: January 17th, 2004, 1:37 pm
by quicksliver
The best bang for you're buck is ZX2 Struts. You will need the following...
(2) Upper Thrust Bearings
(4) Dust boot covers
(1) Set of ZX2 Struts
Re: Struts for H&R springs
Posted: January 17th, 2004, 3:55 pm
by nope-mx3
Just buy the Koni adjustables.
I run these with H&R springs and it`s excellent.
Then you get the Whiteline rear swaybar.
nope-mx3
Re: Struts for H&R springs
Posted: January 17th, 2004, 5:54 pm
by millaj01
I have the H&R springs mated to the ZX2 struts and the combo works quite well in my opinion. The ZX2 struts do indeed seem to be the best deal for the money. I have the stock 15" wheels on my GS and the ride is firm and a little bumpy, but not too bad. I'm going to get 17" wheels in the spring, and expect my comfort level to decrease by quite a bit.
Re: Struts for H&R springs
Posted: January 18th, 2004, 12:06 am
by D_Gagne
were do i get zx2 struts and will they work doog with groiund controls? thanx dudes and i have 18 inch rims with 215/35 /18 rubber i wanna go like almost even with the wheel well lemme know what i should do thanx dudes
Re: Struts for H&R springs
Posted: July 24th, 2004, 1:47 pm
by Macen
Originally posted by D_Gagne:
were do i get zx2 struts
http://www.oemfordparts.com