Page 1 of 1

Im new here and have a few questions...

Posted: April 7th, 2004, 1:09 am
by Nati-Mx-3
What’s the difference between Intrax lowering springs and Eibach Prokit???(Besides the height of the drop) If I were to buy one of the two would I have to purchase chamber kits???

And how benifical would it be to do the KLZE swap in my car? I have the 1.8 v6 right now

O and i am new to the forum, I am from Cincinnati, Check out our forum up here, its www.Cincystreetscene.com some pretty quick cars on there.

Thanks for all the help...

Re: Im new here and have a few questions...

Posted: April 7th, 2004, 9:59 pm
by Nati-Mx-3
anyone with some help???

Re: Im new here and have a few questions...

Posted: April 7th, 2004, 10:13 pm
by mx3man83
I had Intrax springs, the drop was barely noticable.
Going from a 130hp k8 to near 200hp klze will be very beneficial to your car. The difference is night and day. Good luck.

Re: Im new here and have a few questions...

Posted: April 8th, 2004, 8:16 am
by monty73741
the spring rate should be different, eiback used to make 2 version the regular & pro, then discontinued em but then just brought out the pro kit, i would email corksport for more info derrick will be able to help you, & as for the klze or klde, they say the klze has 200 & the klde has 189....well ive seen some discussion on probe talk that says the klze might not have 200 hp

Re: Im new here and have a few questions...

Posted: April 8th, 2004, 3:47 pm
by Nallboy
Originally posted by monty73741:
as for the klze or klde, they say the klze has 200 & the klde has 189
Stock? The I thought the DE has 170 HP.