Page 1 of 1
old nitrous q
Posted: February 28th, 2002, 5:22 pm
by Shady469
not doin the nitrous thing anymore.<p>[ September 18, 2002: Message edited by: Shady469 ]
Re: old nitrous q
Posted: February 28th, 2002, 5:57 pm
by maldo
Just a thought, if you don't know where these basic parts are, maybe you should get a mechanic to do the work. [img]shrug.gif"%20border="0[/img] <P>If you do want to attempt it, the intake hose actually goes to the manifold. It is looking for vaccum. The throttle position sensor (TPS) is located on the side of the throttle body. Fuel Pressure Regulator (FPR) is mounted on the fuel rail, it is on the left side (when facing the car) and there will be a vaccum line going to it.<P>Use the online manual. The instructions that are on Zex's site are quite good.
Re: old nitrous q
Posted: February 28th, 2002, 6:16 pm
by Shady469
yeah i had a big ol brain fart and was kind of geekin out but i took another look after talkin to the zex ppl and it looks like its gonna be a snap. one thing though for the 12 volt source: ive already got my ignition and what not running of the one wire. are there amy other sources or will it be fine to run it off the same wire.
Re: old nitrous q
Posted: September 13th, 2002, 11:42 am
by Paragon
let me know how it all goes, PM me or post here, i'm looking to do the same setup
Re: old nitrous q
Posted: September 13th, 2002, 11:45 am
by OsoSlo z28
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Shady469:<BR><STRONG>yeah i had a big ol brain fart and was kind of geekin out but i took another look after talkin to the zex ppl and it looks like its gonna be a snap. one thing though for the 12 volt source: ive already got my ignition and what not running of the one wire. are there amy other sources or will it be fine to run it off the same wire.</STRONG><HR></BLOCKQUOTE><P>is it a switched 12v or a direct 12v?
Re: old nitrous q
Posted: September 13th, 2002, 2:50 pm
by Paragon
i imagine it won't be a constant....that way no draw when the car is off
Re: old nitrous q
Posted: September 13th, 2002, 6:43 pm
by OsoSlo z28
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Paragon:<BR><STRONG>i imagine it won't be a constant....that way no draw when the car is off</STRONG><HR></BLOCKQUOTE><P>if it has an on/off switch, there won't be any draw as long as it's switched off.
Re: old nitrous q
Posted: September 15th, 2002, 7:29 pm
by boostedmx
wire them both off a switched . it doesnt matter cause you will only be using it when the car is on. this way parasitic draw is eliminated. not that it would definately be a factor. just make sure the circuit is large enough to support it.
Re: old nitrous q
Posted: September 16th, 2002, 12:22 pm
by 93mxrgs
zex sucks... get n.o.s<P><BR>i had a zex kit.. the hp gains are NO WHERE NEAR claimed