how too?
Posted: July 26th, 2004, 10:07 pm
how do I take the lens off my altezza lights? I did a search but nothing came up.
thanks.
thanks.
Page 1 of 1
Re: how too?
Posted: July 26th, 2004, 10:29 pm
i believe most people have baked it in the oven to get the lens off. i know ive read a slew of them..... do a search under appearence>bake in oven
Re: how too?
Posted: July 26th, 2004, 10:30 pm
i guess they would be the same as headlights right?
1. well what you do is heat up the oven to 250*F... takes a few min.
2. turn off the oven, and stick in your light (oven heat is off, just the temp is warming the housing).
3. wait 5-10 min and take it out.
4. with a knife or flathead screwdriver, pry off the lense cover. the glue or whatever has been heated up so you can do that.
enjoy
1. well what you do is heat up the oven to 250*F... takes a few min.
2. turn off the oven, and stick in your light (oven heat is off, just the temp is warming the housing).
3. wait 5-10 min and take it out.
4. with a knife or flathead screwdriver, pry off the lense cover. the glue or whatever has been heated up so you can do that.
enjoy
Re: how too?
Posted: July 26th, 2004, 11:08 pm
i used a hairdryer and a screwdriver.....just go slowly you may crack the lens
Re: how too?
Posted: August 2nd, 2004, 12:38 am
Yeah unfortunately I used a hair dryer as well it works umm but it is better to use the oven. But I know how it is mom doesn't want you to so use a heat gun or a blow dryer make sure you seal those up with cylicone. I dont know just my 2 cents.