MX-3.com

Finally! We have a fellow MX'er in Phoenix to get a mold made for a CF hood. I have spoken with him and the owner of the company that is going to try and make these hoods possible. They will be plain CF hoods. No scoops as yet.. They are not sure that it will be worth doing the mold as it is a rare car. We at least need 15 interested parties for them to make the mold. The hoods will be in the 400 dollar range as I have been told by Anthony, the owner. If anyone is interested please leave your name and email address on this thread as they will be checking its progress. Thanks guys.<BR> P.S. A inverted scoop such as the one seen on the sphere graphics car is a possibility.

I'm highly interested, but if it's going to be just a one-off item, I probably shouldn't be counted. I currently have some parts of my car that HAVE to get fixed, before I can even think about aftermarket, so I won't be able to put down the $400 or so. I also really like the idea of an inverted scoop-somthing subtle, but different and functional. As a side note, a lightweight hood would be of great help to all the gimps out there who own MX3's. (I think technically I'm the only one, haha) Being 4' off the ground, and only able to use one arm to push it up, (rather than lift), a light hood would make getting into the engine bay MUCH safer and easier. Don't remember if it's in my signature, so here's my info:<P>Mason Holmes<BR>masonholmes@hotmail.com <BR>and/or<BR>mason_holmes@berea.edu<P>AIM name:<BR>tinytacohead<BR>and/or<BR>tinytacoheadtwo

that is a great price, but i'd like scoops. i'd buy one either way. count me in. ParagonXV@hotmail.com

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Paragon:<BR><STRONG>that is a great price, but i'd like scoops. i'd buy one either way. count me in. ParagonXV@hotmail.com</STRONG><HR></BLOCKQUOTE><P> Inverted scoops or elevated?

Very Interested...<P>Antonio<BR>badboy01@optonline.net

You Heard The Man! We Need 15 People To Get This Project Started. $400.00-a-pop, it's the lowest price c/f hood on this bulletin board. If you guys want to check out what kind of work Financial Vision produces, go to <A HREF="http://www.financial-vision.com" TARGET=_blank>www.financial-vision.com</A> ! ! !

i am in, inverted would be definitely nice anyways i am in

I say a hood that could be used for the b6t, that way we can have a lighter hood that serves two purposes..one its light, two you can get it instead of a scoop for your stock hood with the b6t

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Ryencool:<BR><STRONG>I say a hood that could be used for the b6t, that way we can have a lighter hood that serves two purposes..one its light, two you can get it instead of a scoop for your stock hood with the b6t</STRONG><HR></BLOCKQUOTE><P> Probably wont happen. The light part yes but the scoop thing no.

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by N/A:<BR><STRONG>You Heard The Man! We Need 15 People To Get This Project Started. $400.00-a-pop, it's the lowest price c/f hood on this bulletin board. If you guys want to check out what kind of work Financial Vision produces, go to <A HREF="http://www.financial-vision.com" TARGET=_blank>www.financial-vision.com</A> ! ! ! </STRONG><HR></BLOCKQUOTE><BR> Hey man, gimme a call sometime today I need to talk to ya. 866-747-6464 Ask for Jarid.

wow, the price is so right. i love plain hood also(looks clean to me). man, i would not have enough money for now, but i hope it would still be available after a groupbuy.

hey count me in, that is not a bad proce at all

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by cjthor:<BR><STRONG>Finally! We have a fellow MX'er in Phoenix to get a mold made for a CF hood. I have spoken with him and the owner of the company that is going to try and make these hoods possible. They will be plain CF hoods. No scoops as yet.. They are not sure that it will be worth doing the mold as it is a rare car. We at least need 15 interested parties for them to make the mold. The hoods will be in the 400 dollar range as I have been told by Anthony, the owner. If anyone is interested please leave your name and email address on this thread as they will be checking its progress. Thanks guys.<BR> P.S. A inverted scoop such as the one seen on the sphere graphics car is a possibility.</STRONG><HR></BLOCKQUOTE>

sorry jarid, didn't see your reply to mine...i'd like inverted, but elevated, or plain, i want one! that is a killer price!

Allright guys...Looks like we have Nine people so far. We are looking at getting a hood from a wrecking yard. Would anyone like to chip in for this? Mike is trying to locate a hood in Arizona..Prolly around 80 bucks. I have 20 on it..