MX-3.com

Someone in this forum told me they only have 120. I thought they had more than that.
Is it true that V6 MX3s have 170ft Torque?

I think that would be the KL-ZE

did you read that it has 170tq or you "thought" cause thoughts arent always right lmao. its ~115tq

and klze's are 160 of torque

omf! when is the idiocy going to end?

Originally posted by babyblueMX3:
and klze's are 160 of torque

its 195 tq i believe on klze

I belive tq depends on if you have the Millenia or the Mx-6 cams

Originally posted by mitmaks:

Originally posted by babyblueMX3:
and klze's are 160 of torque

its 195 tq i believe on klze

nah i saw i dyno it wasn't near 195.....
and what Nd4SpdSe said is also true..

Yeah I've seen tq range from ~160 to ~175 on the ZE. Depends on a few factors. But there's def. not that much in the stock V6.

KLZE makes 22.8 kg/m, converted that is about 164 ft/lbs at 5500rpm

I am talking about a 93 V6 MX3. Not no MX6 or 95 MX3. I just thought I would tell you guys this because someone told me that MX3s have 170ft Torque. Not 120!
Now can I get some comfirmation that my 93 MX3 has 170ft Torque?

no. It does not. Not even close. ALL stock v6 mazda mx3's have roughly 115 ft lbs of torque.

there you go.....and I'm not sure where did you get the idea that 95 engines were different than the others

I don't know where you get your info, youngin, but it's not very good. The stock V6 is no different, and def. nowhere near 170 ftlb tq.

yup, how do you expect a engine that is rated at 130hp to make MORE torque when its got such a small displacement?

THe stock torque rating is 115 btw. The 2.5 KLZE doesn't even make 170 ft/lbs stock.