Page 1 of 1
max power questions
Posted: August 29th, 2003, 1:22 pm
by dennisvs
Hi guys,<p>Can anyone tell me what the max hp is for the tranny and drivers axels?
If I want to get 300/350 hp out of the engine, what tranny do you prefer?
Thanks<p>Dennis
Re: max power questions
Posted: August 29th, 2003, 1:36 pm
by TsiMiata
all the trannies are the same. They all get weak around 300hp.<p>having stronger axles made isn't a big deal. stronger tranny is.
Re: max power questions
Posted: August 29th, 2003, 1:39 pm
by dennisvs
thought so.
the axels can be made. but how much can the stock ones have?
any suggestions for a tranny?
Re: max power questions
Posted: August 29th, 2003, 2:48 pm
by Tyler17rose
If you are getting custom axels made, go track down a LSD.
Re: max power questions
Posted: August 29th, 2003, 2:53 pm
by dennisvs
How much will it keep?
Re: max power questions
Posted: August 29th, 2003, 6:06 pm
by Zoso124
constant pounding at around 250 will snap them.
Re: max power questions
Posted: August 29th, 2003, 6:08 pm
by dennisvs
That's not enough.
any other tranny's?
Re: max power questions
Posted: August 29th, 2003, 6:17 pm
by Bri94GS
Which motor do you plan on running 300-350 HP from?
Re: max power questions
Posted: August 29th, 2003, 6:21 pm
by dennisvs
The KL-ZE
Re: max power questions
Posted: August 30th, 2003, 1:48 am
by Zoso124
May I ask what your doing under your hood to achieve the 300/350 mark?
Re: max power questions
Posted: August 30th, 2003, 3:31 am
by 2RotorsNaDream
Id love to know too, then I wouldnt put in my KL-03 next week.
Re: max power questions
Posted: August 30th, 2003, 5:07 am
by dennisvs
If it's done I all let you know.
Stil looking for an answer for the tranny and axels because I stil don't know how much they can have.