Page 1 of 1

KL-ZE Clutch

Posted: March 19th, 2003, 11:00 pm
by Jon_Carnie
I was wondering what kind of a clutch setup all of the people out there with the KL-ZE are running, i need to buy one and have been leaning mostly twords ACT...

Re: KL-ZE Clutch

Posted: March 20th, 2003, 12:32 am
by novadoc
clutchmaster or ACT is the way to go<p>go with a stage 2 or 3<p>there are some people running stage 1<p>i have the clutchmaster stage 3 and i love it

Re: KL-ZE Clutch

Posted: March 20th, 2003, 12:37 am
by Hy300
Clutch Master: Stage 3<p>I heard that the MX-6 clutch disk is actually larger in diameter. Anyone back that claim up, it could be better for performance and street

Re: KL-ZE Clutch

Posted: March 20th, 2003, 12:55 am
by Buff1110
the mx6 and pgt clutch is larger in diameter by about 10mm i believe. i have a cm3 in my room awaiting the swap in a few months. what made me choose this over the act is the stock pedal feel because my gs is a daily driver so in traffic this would be easier. and after reading peoples experiences with the cm3. its very well liked.

Re: KL-ZE Clutch

Posted: March 20th, 2003, 1:04 am
by Hy300
The CM3 is very easy to engage and disengage and the pedal is firm but easy to use. I should've gotten an MX-6 clutch then, I have the MX-3 disk.

Re: KL-ZE Clutch

Posted: March 20th, 2003, 5:38 pm
by Zoso124
So your saying you have a CM Stage 3 for an MX3 not an MX6???

Re: KL-ZE Clutch

Posted: March 21st, 2003, 9:27 am
by Marlon
<blockquote><font size="1" face="Verdana, Arial">quote:</font><hr>Originally posted by Zoso124:
So your saying you have a CM Stage 3 for an MX3 not an MX6???<hr></blockquote><p>same thing
just got rr-racing.com they have good deals there

Re: KL-ZE Clutch

Posted: March 25th, 2003, 1:30 pm
by Jon_Carnie
So a clutch masters stage 3 would be the best to go with? i've heard bad things about centerforce...

Re: KL-ZE Clutch

Posted: March 25th, 2003, 1:55 pm
by Custommx3
http://www.rr-racing.com/bulkbuy.htm<p>Dont get a kevlar clutch. Ive heard by few that they chatter.

Re: KL-ZE Clutch

Posted: March 25th, 2003, 6:22 pm
by Jon_Carnie
Will the mounts that can come in those bulk clutch buys work with mx-3's?<p>[ March 25, 2003: Message edited by: Jon_Carnie ]</p>