Kl-Ze....

V6 Technical/Performance Discussions
Post Reply
letsroll
Junior Member
Posts: 14
Joined: January 8th, 2002, 2:01 am
Location: Bedford, Quebec

Kl-Ze....

Post by letsroll »

Is the KL-ZE expensive to maintain for a Quebec mx-3 owner???
pelado
Regular Member
Posts: 1179
Joined: August 27th, 2001, 2:01 am
Location: Russellville, AR, USA

Re: Kl-Ze....

Post by pelado »

Unless you screw up an intake camshaft or need new pistons it shouldn't be any more expensive to maintain than a KL-03.<p>[ April 22, 2002: Message edited by: pelado ]
KLZE, ZE PCM, UR pulley, PS catback, PS STS, PRM, IAC bypass, 64mm TB, FOP hair gel
David Coleman
Senior Member
Posts: 2516
Joined: November 7th, 2000, 2:01 am
Location: Gainesville, FL USA
Contact:

Re: Kl-Ze....

Post by David Coleman »

You can get replacement pistons from Mazdamotorsports in Cali for $42USD IIRC.<BR>Their ZE cams are a bit more expensive.
David Coleman
I used to know alot about MX-3's, but not so much anymore. Oh well.
mx3-precidia-gs-1995
Regular Member
Posts: 94
Joined: September 28th, 2001, 2:01 am
Location: Quebec
Contact:

Re: Kl-Ze....

Post by mx3-precidia-gs-1995 »

what...i can order some ZE part?<BR>Like HLA ZE intake... and piston /rings ?<BR>what is the web site or phone number please
User avatar
Aston Wards
Regular Member
Posts: 761
Joined: December 28th, 2001, 2:01 am
Location: Christchurch, New Zealand

Re: Kl-Ze....

Post by Aston Wards »

<A HREF="http://www.mazdamotorsports.com" TARGET=_blank>www.mazdamotorsports.com</A>
91 Eunos Presso KF-ZE
89 Nissan 300ZX TT 2+2
90 Nissan 300ZX TT 2+0
Image
Post Reply

Return to “V6 Technical/Performance”