Page 1 of 1
Problems with fuel management install
Posted: August 1st, 2004, 8:16 pm
by Marlon
got some Questions
what dose each wire do on the 4 wire tps off an auto(92-93)
what dose each wire do on the Distributor (theres 3)
is it ok to hook up a msd and my megasquirt all to the ignition switch
and can i just hook up the vac nipple off of the fpr to any vac line
what wire gets tapped for the msd 6 white wire
thanks hopefully i can get it running soon
Re: Problems with fuel management install
Posted: August 3rd, 2004, 4:05 pm
by Marlon
i need to know what each wire dose on the tps for the auto
theres 4 wires
black with brown
red with white
green with red
green with white
i think the black with brown is the ground
the green with red is the 5v
then not sure about the other 2
heres a pic of the wiring diagram
<img src="
http://10.pichold.com/tpswith_text.jpg" alt=" - " />
thanks
<small>[ August 03, 2004, 07:33 PM: Message edited by: Marlon ]</small>
Posted: July 29th, 2006, 7:51 pm
by Bochek
sorry to bring up such a old topic, did this ever get compleated. im at the point where i need to know how to get the electronic advance working with the Distributor.
Bochek
Posted: July 29th, 2006, 10:01 pm
by ryanlindenberg
Ok here it goes:
Red/Green = +5 Volts
Green/White = Throttle %
Black/Brown = Ground
Red/White = Idle Switch
Posted: July 29th, 2006, 10:08 pm
by Bochek
ryanlindenberg wrote:Ok here it goes:
Red/Green = +5 Volts
Green/White = Throttle %
Black/Brown = Ground
Red/White = Idle Switch
where does it get the throttle % from? isnt the tps only a idle/cruse/wot switch?
Bochek
Posted: July 29th, 2006, 10:15 pm
by Bochek
also, i have the b6 sohc, so its going to be different then the dohc engine wiring harness. my manual doesnt show thoes colour wires and its too dark out to go look @ my car, so for now il take your word on it, i just need to know where it gets the signals and how this could be configured with MSnS-E
Bochek
Posted: July 29th, 2006, 10:28 pm
by ryanlindenberg
yea i don't know if your SOHC will be the same or not. colors should be similar i would think though.
anywho, it does send the throttle %, it shows up on my Haltech. I'm using a 95 TPS.
Posted: July 29th, 2006, 10:34 pm
by Bochek
ahh thats because of the 95 tps, so that means that the disty can not be getting that input from my setup, (no throttle % tps)
has anyone actually installed a msns on a b6?
Bochek
Posted: July 29th, 2006, 10:46 pm
by ryanlindenberg
there is a guy on this forum that says he has one installed... his name is Custommx3...may be the same guy as on here
probably not on a SOHC but at least he could help with some of the MS&S stuff.
http://www.mp3car.com/vbulletin/showthread.php?t=65821
Posted: July 29th, 2006, 11:00 pm
by Bochek
your link goes to a ebay ad for a twin loop muffler
Posted: July 29th, 2006, 11:05 pm
by ryanlindenberg
sorry, fixed it!
Posted: July 30th, 2006, 9:18 am
by MechaManZero
green and white is def going to the green and white wir on the VAF. Rock on
Posted: July 30th, 2006, 9:30 am
by Bochek
you guys are deffenlty talking doch wiring harness here.
Bochek
