MX-3.com

How hard will this swap be?

i can get a 1995 DOHC for 200 bux with a blown tranny.. also can i use the tranny from my RS SOHC for the DOHC motor and what else would i need they r both 4cyl.. so i am thinking if ai can get this DOHC i can pull it junk the old body and Rebuild it then drop it in my RS and have more power...

any help would be grrrreat

should be a swap and drop from what i have read, just swap the engine, ECU, anything else i aint sure of

and the COMPLETE wiring harness

would someone please explain all that you have to do in this swap?

pull old motor, install new motor, pull old wire harness, install new one, install ecu and hook everything up

I would unhook the harness and pull the harness with the motor. It is much easier that way in my oppinon

wil my SOHC tranny work on the DOHC