Page 1 of 1
1/4 mile times for 4cycl turbo MX3
Posted: January 7th, 2004, 9:01 pm
by osargeant
Could you guys who have turbocharged your existing MX3 motor or swapped in either the B6T or the BPT engines post your 1/4mile times.
I am keen to see what 1/4mile times the turbo 4cycl Mazda MX3s are doing. I have yet to run any 1/4mile time with my turbo MX3 and would like some figures to strive for.
Re: 1/4 mile times for 4cycl turbo MX3
Posted: January 7th, 2004, 11:32 pm
by torpedan
http://www.mx-3.com/ubb/ultimatebb.php?ubb=get_topic;f=22;t=000222
you can find them in there sorry it needs a update just didnt touch it for the off season =]
Re: 1/4 mile times for 4cycl turbo MX3
Posted: January 7th, 2004, 11:48 pm
by Shady469
wait a little while into the season. i'm predicting the turbo 4's are going to dominate the board... we've all pretty much done rebuilds and are coming out with a lot more power and mods(and alot less weight in several cases).
i just hope we can get some recognition at events... it's kind of hard to be competative in the turbo 4 classes when your racing B-series hybrid honda's with turbos and/or N20. i quess we'll have to see...
Re: 1/4 mile times for 4cycl turbo MX3
Posted: January 8th, 2004, 11:45 am
by philcosta
i will post my results during the season
Re: 1/4 mile times for 4cycl turbo MX3
Posted: January 9th, 2004, 1:20 am
by 94mx3rsr
I am #13 ...ran the car twice with a clutch slipping badly, a total of 3 runs
result
gave 14.85 @ 96mph with 60ft of 2.35 which is not good. running 8.5lbs of boost on a warm night with a stock exhaust (stock boost)..on a bp55 mapping
13 seconds is no problem with 12 lbs and updwards of boost and a 2.5 inch exhaust....
expect around 13.6-13.8 and 102-105mph trap speed with a bpt gtx with stock turbo, 2.5 inch exhaust and k&N filter and 12-15 lbs of boost.