Page 7 of 24
Re: matts 94 mx-3 gs build. NOW WITH FLAT BLACK PRIMER
Posted: April 25th, 2012, 6:30 pm
by mx3matt
Re: matts 94 mx-3 gs build. MOARRRRR GOODIES
Posted: April 29th, 2012, 11:49 am
by mx3matt
so i cant get the motor torn down till i find some bolts to mount it to the stand.
recieved my twm short shifter and hardware. msp shift knob doesnt fit tho so i'll be looking at something like an ARC TITAN or cheapr blox alternative.

Re: matts 94 mx-3 gs build. MOARRRRR GOODIES
Posted: May 5th, 2012, 11:36 pm
by mx3matt
so i've still gotta take some pics but i've installed the twm ss and its amazinggggg!!!
shifts are short and feel fairly precise, i'm gonna drill the rivet out on the transmission side and do the full 4 bushing swap and see how that turns out. still have an occasional drivetrain vibration that makes me nervous, happens at slight steering angle at slow to medium speeds in 1st 2nd and 3rd especially when at slow speed higher gear.
this morning i did a engine flush and oil change, at the same time i replaced the gear oil with lucas synthetic 75w90 and it shifts much quieter, now that the brakes have bedded i'm actually pretty happy with the stopping power. Now i've really gotta get on finishing my wheels and getting them fitted and figure out a proper ride height and stance.
gotta put some more time into getting my seats fitted, really having a hard time getting the seat height i want and now my buddy is bugging me about trying out fixed buckets(minor adjustability in the mount), he owns a little performance shop so he's offering me a pretty good deal.
picked up a new muffler, single tip 2.25 inlet hopefully cleaner sounding then the current twin tip pos.
still haven't found any damn bolts that will work with my stand so i may have to shave the brackets more. ALL WORK AND NO PLAY MAKES MATT GO SOMETHING SOMETHING........
Re: matts 94 mx-3 gs build. NOW WITH FLAT BLACK PRIMER
Posted: May 6th, 2012, 2:57 pm
by Mooneggs
mx3matt wrote:
Did you get these from Mazda? Do you have the part number??
Re: matts 94 mx-3 gs build. MOARRRRR GOODIES
Posted: May 6th, 2012, 11:25 pm
by mx3matt
ya i used to work at a dealer, i'll dig up the box tomorrow and grab you a part number.
if i remember correctly its kl01-10-602a
Re: matts 94 mx-3 gs build. MOARRRRR GOODIES
Posted: May 6th, 2012, 11:53 pm
by mx3matt
Re: matts 94 mx-3 gs build. MOARRRRR GOODIES
Posted: May 7th, 2012, 11:08 am
by cWs306
mx3matt wrote:
Dunno where you live or if its illegal or not, but you might need a shift pattern visible to the drive. avoid a ticket.
Nice knob tho, i like the color.
Re: matts 94 mx-3 gs build. MOARRRRR GOODIES
Posted: May 7th, 2012, 12:56 pm
by Josh
Looks good, but does the sippy cup cut down on spillage while driving?

Re: matts 94 mx-3 gs build. MOARRRRR GOODIES
Posted: May 7th, 2012, 5:56 pm
by mx3matt
ya my son falls asleep everytime he's in there lol. leave the sippy cups out of this lmfao
Re: matts 94 mx-3 gs build. MOARRRRR GOODIES
Posted: May 7th, 2012, 6:01 pm
by wytbishop
cWs306 wrote:
Nice knob.
ummm....thank you?
Re: matts 94 mx-3 gs build. MOARRRRR GOODIES
Posted: May 7th, 2012, 6:40 pm
by mx3matt
wytbishop wrote:cWs306 wrote:
Nice knob.
ummm....thank you?
HAHA.
i love when s--- starts to fall into place. its nice seeing my ridiculous parts hoarde get a bit smaller. nice having my dad off my a-- too.
Re: matts 94 mx-3 gs build. MOARRRRR GOODIES
Posted: May 8th, 2012, 6:17 pm
by diezzel
Looks like a well polished knob you have there . HA

. Mabye a little to much 5 on 1 . Just kidding though . Looks very good .
Re: matts 94 mx-3 gs build. MOARRRRR GOODIES
Posted: May 11th, 2012, 8:14 am
by Nd4SpdSe
cWs306 wrote:Dunno where you live or if its illegal or not, but you might need a shift pattern visible to the drive. avoid a ticket.
Nooo way that there's a law like that that exists....
Re: matts 94 mx-3 gs build. MOARRRRR GOODIES
Posted: May 11th, 2012, 10:00 am
by wytbishop
diezzel wrote:Looks like a well polished knob you have there . HA

. Mabye a little to much 5 on 1 . Just kidding though . Looks very good .
No such thing as too much 5 on 1...I've tried.
Re: matts 94 mx-3 gs build. MOARRRRR GOODIES
Posted: May 11th, 2012, 10:49 am
by diezzel
Change it up a bit . Look , there is a stranger in here. HA . Smokin .
