Re: Ryan's Final Build
Posted: January 29th, 2011, 8:20 pm
Ya but will that sh*t work once it's all put together? Stay tuned Bat fans.Sleeper6 wrote:Lookin good!
Page 6 of 22
Re: Ryan's Final Build
Posted: January 29th, 2011, 8:57 pm
Same bat time, same bat channelDaninski wrote:Ya but will that sh*t work once it's all put together? Stay tuned Bat fans.Sleeper6 wrote:Lookin good!
Re: Ryan's Final Build
Posted: February 6th, 2011, 9:34 pm
Courtesy of Mark. I got that goop off of it already.
I'd like to take more of the divider out, but I'll need longer, better quality burrs. I've been doing a lot of reading on PT about porting.
Re: Ryan's Final Build
Posted: February 6th, 2011, 10:51 pm
lookin good ryan.
Re: Ryan's Final Build
Posted: February 6th, 2011, 11:34 pm
it's incredible what some tlc and a coat of paint can do! looking great!
Re: Ryan's Final Build
Posted: February 7th, 2011, 1:01 pm
Looking good Ryan !
Re: Ryan's Final Build
Posted: February 7th, 2011, 1:47 pm
One summer I worked in a hot rod restoration shop when I was in university. I spent weeks bead blasting and paining every fastener on a 56' T-bird. It took me 4 days to recondition the starter motor and steering linkage. it's super time consuming but the results are awesome.
Gold star for Ryan.
Gold star for Ryan.
Re: Ryan's Final Build
Posted: February 7th, 2011, 11:55 pm
Coming soon: FrankenBooster -> RS vac chamber, GS master.
Re: Ryan's Final Build
Posted: February 8th, 2011, 6:29 pm
will that work? i know the rs one is smaller.
Re: Ryan's Final Build
Posted: February 8th, 2011, 7:56 pm
that is the entire point 
Does anyone have spare timing idlers and a RH cam gear?
Does anyone have spare timing idlers and a RH cam gear?
Re: Ryan's Final Build
Posted: February 9th, 2011, 12:20 am
Not sure if this has been done before....
Also, some crappy photos of my damaged ZE pistons:
Also, some crappy photos of my damaged ZE pistons:
Re: Ryan's Final Build
Posted: February 9th, 2011, 3:56 am
What is the use of this ?RS vac chamber, GS master
Re: Ryan's Final Build
Posted: February 9th, 2011, 5:54 am
to save engine room. and ryan i havent seen anyone put the letters on the rad support. It looks good though i may have to do it cause all i have is primer on mine for now cause the weather is a bit cold and my family wont let me spraypaint in the house or powdercoat in the house.
Re: Ryan's Final Build
Posted: February 11th, 2011, 7:34 pm
Decomposed a KL in 45 mins.
drained "oil" ... was actually 25% coolant and 75% mastitis oil.
Magically appears in my basement... Not. Felt like I walked 20 miles with that thing. Must weigh 250 lbs.
Re: Ryan's Final Build
Posted: February 12th, 2011, 11:40 pm
an hour of labour:
Another hour or two:
Another hour or two: