take a look at the compressed spring pressure of both and then correct what you just said:)Nd4SpdSe wrote:than you can go with Interprep, and the best would be Ferrea.
Nd4SpdSe - 1992 Mazda Mx-3 GSR (End Of File)
- mx3autozam
- Senior Member
- Posts: 2950
- Joined: September 24th, 2005, 9:09 pm
- Location: Kitchener
Re: Nd4SpdSe - 1992 Mazda Mx-3 GSR (Dec 11: Even More Parts)
93 Mazda MX3 KLZE Turbo
- marcdh
- Regular Member
- Posts: 1460
- Joined: July 26th, 2006, 3:54 pm
- Location: Belfast -Northern Ireland
- Contact:
Re: Nd4SpdSe - 1992 Mazda Mx-3 GSR (Dec 11: Even More Parts)
Interprep 65lb seat pressure, 195lb open pressure.
Ferrea 75lb seat pressure, 195lb open pressure.
As a side note the ZE exhaust spring assembly are the same as DE, its only the ZE intake springs, retainers, locks and lifters differ.
Anyway...Epic build Nd4SpdSe![Smile :)](./images/smilies/icon_smile.gif)
Ferrea 75lb seat pressure, 195lb open pressure.
As a side note the ZE exhaust spring assembly are the same as DE, its only the ZE intake springs, retainers, locks and lifters differ.
Anyway...Epic build Nd4SpdSe
![Smile :)](./images/smilies/icon_smile.gif)
AZ-3 1498cc Turbo! EVO 8 turbo and manifold, 5 stud swap, SSR Type C, DIYPNP seq Megasquirt
Mx-3 2.5 V6 Turbo 291 BHP 251 lbft @ 8psi - Retired due to rust and back at uni
View Worklog
![Image](http://marcharrington.co.uk/banner2013.png)
Mx-3 2.5 V6 Turbo 291 BHP 251 lbft @ 8psi - Retired due to rust and back at uni
View Worklog
![Image](http://marcharrington.co.uk/banner2013.png)
- Nd4SpdSe
- Senior Member
- Posts: 11212
- Joined: May 25th, 2002, 2:01 am
- Location: Québec City, Quebec, Canada
- Contact:
Re: Nd4SpdSe - 1992 Mazda Mx-3 GSR (Dec 11: Even More Parts)
I picked up my CF hatch a few days ago. Unfortunately it was late so I dropped it off at my grandmothers and left. But I did take some pics of it in transport. Sorry, I just had my camera's phone. I left the better for my camera at home.
I had to attach it to the roof-rack...it was about 1-2" too wide to fit inside.
![Image](http://img301.imageshack.us/img301/8643/c123008161900yb9.jpg)
![Image](http://img371.imageshack.us/img371/1562/c123008160600fq6.jpg)
I'll take some pics of it over the weekend.
I love having a truck, so useful, even for my Mx-3![Smile :)](./images/smilies/icon_smile.gif)
I had to attach it to the roof-rack...it was about 1-2" too wide to fit inside.
![Image](http://img301.imageshack.us/img301/8643/c123008161900yb9.jpg)
![Image](http://img371.imageshack.us/img371/1562/c123008160600fq6.jpg)
I'll take some pics of it over the weekend.
I love having a truck, so useful, even for my Mx-3
![Smile :)](./images/smilies/icon_smile.gif)
1992 Mazda Mx-3 GSR - 2.5L KLZE : Award Winning Show Car & Race Car ['02-'09] (Retired)
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
-
- Regular Member
- Posts: 1083
- Joined: August 23rd, 2008, 12:09 am
- Location: Beamsville.
Re: Nd4SpdSe - 1992 Mazda Mx-3 GSR (Jan 2: CF Hatch)
wow looks awesome i am stoked for you.
NEED PARTS INSTALLED? PM ME!
![Image](http://i453.photobucket.com/albums/qq253/projectzemx3/avator2.jpg)
![Image](http://i453.photobucket.com/albums/qq253/projectzemx3/avator2.jpg)
- fowljesse
- Supporting Member
- Posts: 5676
- Joined: March 17th, 2006, 2:59 pm
- Location: portland, OR
- Contact:
Re: Nd4SpdSe - 1992 Mazda Mx-3 GSR (Jan 2: CF Hatch)
Congrats! I can hardly wait!
We're going to be playing with Lexan tomorrow![Very Happy :D](./images/smilies/icon_biggrin.gif)
We're going to be playing with Lexan tomorrow
![Very Happy :D](./images/smilies/icon_biggrin.gif)
'93 GS - P&P DE w/ ZE exh. cams/ pistns, KLG4 IM, 65mm TB, MSnS, Phenos, K&N RAI, UDP, Grnd wires, rear batt, filld MM, torq strt, TWM short shftr, Exedy, Lng tube hdrs 2.5" Side exhaust, H&R sprngs, Poly bushngs, strutbars, Alum. crss mmber&tiebar, 22mm swybar, solid links, Direzzas, leather int, Alpine 9805 stereo & alrm, keyless entry, 10 Boston Accoustics spkrs, Prjectrs, Blaster2, CF hood, FG hatch, Lexan
- Nd4SpdSe
- Senior Member
- Posts: 11212
- Joined: May 25th, 2002, 2:01 am
- Location: Québec City, Quebec, Canada
- Contact:
Re: Nd4SpdSe - 1992 Mazda Mx-3 GSR (Jan 3: CF Hatch Pics!)
![Image](http://img185.imageshack.us/img185/642/cfhatch001vv6.jpg)
![Image](http://img185.imageshack.us/img185/4696/cfhatch002md4.jpg)
![Image](http://img396.imageshack.us/img396/6193/cfhatch008rs6.jpg)
![Image](http://img515.imageshack.us/img515/1097/cfhatch009ln1.jpg)
![Image](http://img515.imageshack.us/img515/8969/cfhatch012bk1.jpg)
![Image](http://img133.imageshack.us/img133/8203/cfhatch013gs8.jpg)
![Image](http://img133.imageshack.us/img133/4479/cfhatch014ye6.jpg)
![Image](http://img133.imageshack.us/img133/998/cfhatch017yc3.jpg)
![Image](http://img84.imageshack.us/img84/838/cfhatch020eq6.jpg)
![Image](http://img133.imageshack.us/img133/9172/cfhatch024lm0.jpg)
1992 Mazda Mx-3 GSR - 2.5L KLZE : Award Winning Show Car & Race Car ['02-'09] (Retired)
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
- fowljesse
- Supporting Member
- Posts: 5676
- Joined: March 17th, 2006, 2:59 pm
- Location: portland, OR
- Contact:
Re: Nd4SpdSe - 1992 Mazda Mx-3 GSR (Jan 3: CF Hatch Pics!)
Nice!
Good photograhpy choice; contrasting it against the snow
I'm glad you put up pics because it let's me know that I CAN extend the top Lexan window piece to cover where the garnish/ spoiler would go, and meet the small window piece.
It's going to be cool.
I was bending 20 sets of window visors yesterday, and got a good feel for how to work it without overheating, and screwing up the material. It's a little tricky.
I can make them to sell.
Good photograhpy choice; contrasting it against the snow
![Wink :wink:](./images/smilies/icon_wink.gif)
I'm glad you put up pics because it let's me know that I CAN extend the top Lexan window piece to cover where the garnish/ spoiler would go, and meet the small window piece.
It's going to be cool.
I was bending 20 sets of window visors yesterday, and got a good feel for how to work it without overheating, and screwing up the material. It's a little tricky.
I can make them to sell.
'93 GS - P&P DE w/ ZE exh. cams/ pistns, KLG4 IM, 65mm TB, MSnS, Phenos, K&N RAI, UDP, Grnd wires, rear batt, filld MM, torq strt, TWM short shftr, Exedy, Lng tube hdrs 2.5" Side exhaust, H&R sprngs, Poly bushngs, strutbars, Alum. crss mmber&tiebar, 22mm swybar, solid links, Direzzas, leather int, Alpine 9805 stereo & alrm, keyless entry, 10 Boston Accoustics spkrs, Prjectrs, Blaster2, CF hood, FG hatch, Lexan
- Nd4SpdSe
- Senior Member
- Posts: 11212
- Joined: May 25th, 2002, 2:01 am
- Location: Québec City, Quebec, Canada
- Contact:
Re: Nd4SpdSe - 1992 Mazda Mx-3 GSR (Jan 3: CF Hatch Pics!)
Thanks! Ya, I did that for the contrast and the light, but on the flipside the bright snow made it hard to focus on the dark hatch. Taking it more light to get more details of the hatch would cause the light to oversaturate the picture and make it worse. I did what I could. If you need more pics let me know.
Glad to know it working...can you use the original hatch glass as a mold to get the shape? Rest it on top and let it curve to the shape exactly? I'm still going to order the MS one eventually. But in case that doens't work out, i'll get one of yours. The thing is, I would want an OEM style glass so I can put my garnish and a wing.
Glad to know it working...can you use the original hatch glass as a mold to get the shape? Rest it on top and let it curve to the shape exactly? I'm still going to order the MS one eventually. But in case that doens't work out, i'll get one of yours. The thing is, I would want an OEM style glass so I can put my garnish and a wing.
1992 Mazda Mx-3 GSR - 2.5L KLZE : Award Winning Show Car & Race Car ['02-'09] (Retired)
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
- fowljesse
- Supporting Member
- Posts: 5676
- Joined: March 17th, 2006, 2:59 pm
- Location: portland, OR
- Contact:
Re: Nd4SpdSe - 1992 Mazda Mx-3 GSR (Jan 3: CF Hatch Pics!)
Yes. For the other guys, we're going to take the glass out intact, and use it for a mold. If we get 2 intact, we can sandwich it between the 2. With mine, I'm just going to leave it long.
'93 GS - P&P DE w/ ZE exh. cams/ pistns, KLG4 IM, 65mm TB, MSnS, Phenos, K&N RAI, UDP, Grnd wires, rear batt, filld MM, torq strt, TWM short shftr, Exedy, Lng tube hdrs 2.5" Side exhaust, H&R sprngs, Poly bushngs, strutbars, Alum. crss mmber&tiebar, 22mm swybar, solid links, Direzzas, leather int, Alpine 9805 stereo & alrm, keyless entry, 10 Boston Accoustics spkrs, Prjectrs, Blaster2, CF hood, FG hatch, Lexan
- 10secSim
- Regular Member
- Posts: 145
- Joined: May 30th, 2006, 6:42 pm
- Location: Cornwall, Ontario, Canada
Re: Nd4SpdSe - 1992 Mazda Mx-3 GSR (Jan 3: CF Hatch Pics!)
That car is gona be awesome...I want first dibs on that front bumper when ever you want to switch to the cf!!! ![Mr. Green :mrgreen:](./images/smilies/icon_mrgreen.gif)
![Mr. Green :mrgreen:](./images/smilies/icon_mrgreen.gif)
B6 1.6L DOHC, CAI, custom intake mani. with internal velocity stacks, 65mm thottle body, probe 4-2-1 header, custom 2.5" high flow exhaust, Centerforce dual friction, MS2, MSD 6A, Tokico struts, EIBACH springs.
http://www.cardomain.com/ride/2443642" onclick="window.open(this.href);return false;
http://www.cardomain.com/ride/2443642" onclick="window.open(this.href);return false;
Re: Nd4SpdSe - 1992 Mazda Mx-3 GSR (Jan 3: CF Hatch Pics!)
looks awesome, can't wait to see the final result
92 Mazda MX3 GS
http://www.cardomain.com/id/ukrman" onclick="window.open(this.href);return false; - cardomain page
viewtopic.php?f=46&t=66481 - worklog
viewtopic.php?f=37&t=72099 - feedback
viewtopic.php?f=2&t=71757 - stuff for sale
http://s2.metaldamage.com/c.php?uid=159229" onclick="window.open(this.href);return false; - biggest waste of time
![Image](http://i72.photobucket.com/albums/i181/ukrman28/MX-3/mx3comsignature2-2.jpg)
http://www.cardomain.com/id/ukrman" onclick="window.open(this.href);return false; - cardomain page
viewtopic.php?f=46&t=66481 - worklog
viewtopic.php?f=37&t=72099 - feedback
viewtopic.php?f=2&t=71757 - stuff for sale
http://s2.metaldamage.com/c.php?uid=159229" onclick="window.open(this.href);return false; - biggest waste of time
![Image](http://i72.photobucket.com/albums/i181/ukrman28/MX-3/mx3comsignature2-2.jpg)
-
- Regular Member
- Posts: 559
- Joined: September 25th, 2008, 4:11 pm
- Location: Guelph Ontario Canada
Re: Nd4SpdSe - 1992 Mazda Mx-3 GSR (Jan 3: CF Hatch Pics!)
So your going to use 2 MX-3 hatch glass' to make a mold. Then what? heat the plexi and smoosh it between the two hatch glass' ?? Interesting very curious. Ed Roth wanted a plastic bubble for one of his show cars. He approached one of the big three and they wanted a few thousand bucks for it. So he took a piece of plexiglass, put it in his friends pizza oven, got it hot and then he put compressed air under it and.....poof!! a bubble roof!fowljesse wrote:Yes. For the other guys, we're going to take the glass out intact, and use it for a mold. If we get 2 intact, we can sandwich it between the 2. With mine, I'm just going to leave it long.
http://www.jhudgins.com/hotwheels/pictu ... /index.htm" onclick="window.open(this.href);return false;
Fowljesse, you should forget the carbon fiber hatch and put a bubble top on the MX-3!
![Laughing :lol:](./images/smilies/icon_lol.gif)
Dominic Toretto's whip is a MaZda and his cell phone number starts in "(323)"
My work log http://mx-3.com/phpBB3/viewtopic.php?f=46&t=72471
![Image](http://i155.photobucket.com/albums/s309/IMACHU2/MX%20326%20GS/006-31-2.jpg)
My work log http://mx-3.com/phpBB3/viewtopic.php?f=46&t=72471
![Image](http://i155.photobucket.com/albums/s309/IMACHU2/MX%20326%20GS/006-31-2.jpg)
-
- Senior Member
- Posts: 5554
- Joined: August 25th, 2004, 2:01 am
- Location: Edmonton, Alberta, Canada
Re: Nd4SpdSe - 1992 Mazda Mx-3 GSR (Jan 3: CF Hatch Pics!)
Oh Gawd...don't give him an idea like that!!!
Actually...he'd never do that. It's not aerodynamic.
Actually...he'd never do that. It's not aerodynamic.
94' RS/GS/MS/CF Monster Turbo...coming soon.
93' GS SE, the Black Beast, the former love of my life...soon to be gutted and crushed.
94' GS, black on black, now in several small pieces...and one large crushed piece.
2007 Mazda3 GT Sport --- super fun
2004 Honda RC51 --- Lost forever to some theavin' bastard
My Worklog
My feedback thread
Never attribute to malice that which can be adequately explained by stupidity.
93' GS SE, the Black Beast, the former love of my life...soon to be gutted and crushed.
94' GS, black on black, now in several small pieces...and one large crushed piece.
2007 Mazda3 GT Sport --- super fun
2004 Honda RC51 --- Lost forever to some theavin' bastard
My Worklog
My feedback thread
Never attribute to malice that which can be adequately explained by stupidity.
-
- Regular Member
- Posts: 559
- Joined: September 25th, 2008, 4:11 pm
- Location: Guelph Ontario Canada
Re: Nd4SpdSe - 1992 Mazda Mx-3 GSR (Jan 3: CF Hatch Pics!)
I am going to give him every crazy idea I come up with and then, live precariously through Fowljessie via the forum as he tries everything I dream-up, but am to chicken to try out for myself.wytbishop wrote:Oh Gawd...don't give him an idea like that!!!
Actually...he'd never do that. It's not aerodynamic.
![Laughing :lol:](./images/smilies/icon_lol.gif)
Dominic Toretto's whip is a MaZda and his cell phone number starts in "(323)"
My work log http://mx-3.com/phpBB3/viewtopic.php?f=46&t=72471
![Image](http://i155.photobucket.com/albums/s309/IMACHU2/MX%20326%20GS/006-31-2.jpg)
My work log http://mx-3.com/phpBB3/viewtopic.php?f=46&t=72471
![Image](http://i155.photobucket.com/albums/s309/IMACHU2/MX%20326%20GS/006-31-2.jpg)
-
- Regular Member
- Posts: 162
- Joined: August 31st, 2008, 12:40 pm
- Location: Burlington, Ontario
- Contact:
Re: Nd4SpdSe - 1992 Mazda Mx-3 GSR (Jan 3: CF Hatch Pics!)
make sure you take lots of pictures and write up a work log for future projects with fellow mx'ers