MX-3.com

Ukrman wrote:

JWMX3 wrote:If anyone with auto belts would like to cut their pillars open and have it mount in behind, I will make it for you. But only out of 1.250" Bar in order to keep the same GB pricing.

Is it gonna be like an inch longer so it could hide behind the panel? or will it require a spacer?

like i just said, you will have to cut your b-pillar and it will mount behind the panel. no spacers.

JWMX3 wrote:If anyone with auto belts would like to cut their pillars open and have it mount in behind, I will make it for you. But only out of 1.250" Bar in order to keep the same GB pricing.

I would be in for 2 of these

Mooneggs wrote:

JWMX3 wrote:If anyone with auto belts would like to cut their pillars open and have it mount in behind, I will make it for you. But only out of 1.250" Bar in order to keep the same GB pricing.

I would be in for 2 of these

I'll be down for one

Thread is clean.

This is a group buy thread, any talk not relating to this buy should be done in another thread.

Amen and thank you. I was getting annoyed with the thread jackers.

Joe, I have the cash ready, let me know when and I'll send u the cash

should have payment sent today as well

Ok you can send it anytime, Ill send you confirmation I received your payments.

I'll try to get all the materials by monday if I can get at least a downpayment from everyone in the next few days, and start making the bars next week

linking to the actual GB thread since it's not in here: http://www.mx-3.com/phpBB3/viewtopic.php?f=12&t=72374" onclick="window.open(this.href);return false;

Do you have pics of the autobelt version yet?

I just put my downpayment for both of my autobelt bars: one brushed aluminum and the other black powdercoat.

Mooneggs wrote:linking to the actual GB thread since it's not in here: http://www.mx-3.com/phpBB3/viewtopic.php?f=12&t=72374" onclick="window.open(this.href);return false;

Do you have pics of the autobelt version yet?

Added you to the list.

I dont have pictures yet. It will literally be exactly the same as the one I posted only 3/4" longer, and without the slot in the bracket. I will post pics of both styles being test fitted in my car.

also, we need to drop the moniker "autobelt" version its actually the more normal one and could be used on both seatbelts.. more like one is cut and the other is no cut

me likes. I think i will get one from ya. Maybe i'll come get one in person sometime since we are somewhat local.

Update ---

I stopped at the metal supplier to pick up the materials monday and they had no 1 1/4. So i had to order it.

came in yesterday and i made all the brackets last night.

I'll have pictures tomorrow of the first "cut" bar so mark, chris and bo you guys can see what you're getting

OoOoO getting excited!!

woot woot

Here it is...you'll notice its not fully welded just tacked together for a test fit

SWEET - that's exactly what I wanted... flush with the walls!

now I'm getting excited

So I went out to my car and took the panels off just to see what was going on underneath to make sure that hole is available...

Here's what it looks like for autobelt mx-3's (these are the driver's side pics - it's the same on both sides). From what I can tell there is a little metal piece that runs up and through the bolt hole we need. It seems the intended purpose is to reinforce the seatbelt in case there is ever increased stress... for me I will be cutting this piece so that it touches the bottom edge of the support of the bar (like resting underneath it).

Also, one other note, we will need to get a bolt to fit this since we don't have one there currently...