1.8 V6 - Engine Tuning
Re: 1.8 V6 - Engine Tuning
There`s a shop here in town that claims that they can do a street tune on my car. I don`t buy it, but a lot of people who have gone to him have had luck. However, it`s an mx-3. And to my knowledge cannot be tuned or chipped. So if you could please post pics and a description of the chip that would be great. Please don`t say e-bay.
![Image](http://i659.photobucket.com/albums/uu316/93vtecklr/ClintsSig2.jpg)
1993 Blaze Red SE, 17" blackie's, b+m sts, 45 deg 3" exh pipe/intake tube, K8ZE, aftmkt probe headers, magnaflow hi-cat, all 2.5" piping, magnaflow muffler.
1976 Datsun 620 p/u, full airride, Firestone 2600`s, 16ga fuel cell, Optima yellow top, AZ compressor, custom tubular frame with 9in step notch, 18" 100 spokes
1955 Willys Overland 4x4 P/U, '78 LT1 350 cu.in, fully restored.
Re: 1.8 V6 - Engine Tuning
A chip that makes over 20HP gain at the wheels for the 1.8L engine?
![Laughing :lol:](./images/smilies/icon_lol.gif)
![Laughing :lol:](./images/smilies/icon_lol.gif)
1995 Eunos 30x KLZE
Worklog
Worklog
Re: 1.8 V6 - Engine Tuning
It is not from eBay,The product is called unichip,and the company where I was yesterday are very known in Romania for this type of tuning for ECU! I'll return as soon with DYNO sheet.
Attention ...
I have a japanesse car and i dont hesitate to use it
V6 baby![Razz :P](./images/smilies/icon_razz.gif)
I have a japanesse car and i dont hesitate to use it
V6 baby
![Razz :P](./images/smilies/icon_razz.gif)
Re: 1.8 V6 - Engine Tuning
Who said something about 20hp at wheels???Man,read carefully what i said,My car has 136hp from the factory .. yesterday i took the DYNO TEST and results only 113hp ,and with the chip for ECU now it has 127hp .. there are 14hp from chip;)RX8SE3P wrote:A chip that makes over 20HP gain at the wheels for the 1.8L engine?
Attention ...
I have a japanesse car and i dont hesitate to use it
V6 baby![Razz :P](./images/smilies/icon_razz.gif)
I have a japanesse car and i dont hesitate to use it
V6 baby
![Razz :P](./images/smilies/icon_razz.gif)
Re: 1.8 V6 - Engine Tuning
News news: the car runs better than before !!!!Its amazing acctually ![Shocked :shock:](./images/smilies/icon_eek.gif)
![Shocked :shock:](./images/smilies/icon_eek.gif)
Attention ...
I have a japanesse car and i dont hesitate to use it
V6 baby![Razz :P](./images/smilies/icon_razz.gif)
I have a japanesse car and i dont hesitate to use it
V6 baby
![Razz :P](./images/smilies/icon_razz.gif)
Re: 1.8 V6 - Engine Tuning
I'm pretty sure that RX8SE3P was just making a generalization. The idea is laughable, that's why on this board, with these members, we need proof.
![Image](http://i659.photobucket.com/albums/uu316/93vtecklr/ClintsSig2.jpg)
1993 Blaze Red SE, 17" blackie's, b+m sts, 45 deg 3" exh pipe/intake tube, K8ZE, aftmkt probe headers, magnaflow hi-cat, all 2.5" piping, magnaflow muffler.
1976 Datsun 620 p/u, full airride, Firestone 2600`s, 16ga fuel cell, Optima yellow top, AZ compressor, custom tubular frame with 9in step notch, 18" 100 spokes
1955 Willys Overland 4x4 P/U, '78 LT1 350 cu.in, fully restored.
Re: 1.8 V6 - Engine Tuning
Correct. 14HP sounds ridiculous also, especially since we are talking at the wheels too.... in fact I'm surprised in general that it even made 113HP at the wheels to start with. That's 84KW at the wheels, the K8 only makes 99KW at the engine from stock.93vtecklr wrote:I'm pretty sure that RX8SE3P was just making a generalization. The idea is laughable, that's why on this board, with these members, we need proof.
What we need is a dyno of stock, then on the same day a dyno with the chip. Visiting different dyno or going different days just adds to the variables.
1995 Eunos 30x KLZE
Worklog
Worklog
- Nd4SpdSe
- Senior Member
- Posts: 11212
- Joined: May 25th, 2002, 2:01 am
- Location: Québec City, Quebec, Canada
- Contact:
Re: 1.8 V6 - Engine Tuning
A member posted his dyno a few years back and his stock K8 was 124 at the wheels, and I remember that cause he thought it was low, lol.
1992 Mazda Mx-3 GSR - 2.5L KLZE : Award Winning Show Car & Race Car ['02-'09] (Retired)
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
Re: 1.8 V6 - Engine Tuning
That's very very hard to believe. That's 92KW at the wheels and the K8 only makes 99KW at the crank stock.... so that's suggesting he only had a 7% drivetrain power loss. Generous dyno without a doubt.Nd4SpdSe wrote:A member posted his dyno a few years back and his stock K8 was 124 at the wheels, and I remember that cause he thought it was low, lol.
He thought it was low eh
![Laughing :lol:](./images/smilies/icon_lol.gif)
1995 Eunos 30x KLZE
Worklog
Worklog
- Nd4SpdSe
- Senior Member
- Posts: 11212
- Joined: May 25th, 2002, 2:01 am
- Location: Québec City, Quebec, Canada
- Contact:
Re: 1.8 V6 - Engine Tuning
Lol, that's why I remember itRX8SE3P wrote:That's very very hard to believe. That's 92KW at the wheels and the K8 only makes 99KW at the crank stock.... so that's suggesting he only had a 7% drivetrain power loss. Generous dyno without a doubt.Nd4SpdSe wrote:A member posted his dyno a few years back and his stock K8 was 124 at the wheels, and I remember that cause he thought it was low, lol.
He thought it was low eh
ohh, I found it, but the dyno sheet isn't posted.
viewtopic.php?f=15&t=24054&hilit=dyno" onclick="window.open(this.href);return false;
(wow, that's form 2003, I remembered, that? Lol!)
1992 Mazda Mx-3 GSR - 2.5L KLZE : Award Winning Show Car & Race Car ['02-'09] (Retired)
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
Re: 1.8 V6 - Engine Tuning
http://picasaweb.google.com/martin.solveg/MazdaMX3V6#" onclick="window.open(this.href);return false; last picture its with the DYNO SHEET,now u see its possible to earn extra hp from a chip to this engine;)
Now it has 127hp,but the car feels like it has arround 150hp..it runs EXCELLENT
![Exclamation :!:](./images/smilies/icon_exclaim.gif)
Now it has 127hp,but the car feels like it has arround 150hp..it runs EXCELLENT
![Exclamation :!:](./images/smilies/icon_exclaim.gif)
![Exclamation :!:](./images/smilies/icon_exclaim.gif)
![Exclamation :!:](./images/smilies/icon_exclaim.gif)
Attention ...
I have a japanesse car and i dont hesitate to use it
V6 baby![Razz :P](./images/smilies/icon_razz.gif)
I have a japanesse car and i dont hesitate to use it
V6 baby
![Razz :P](./images/smilies/icon_razz.gif)
-
- Senior Member
- Posts: 6451
- Joined: June 19th, 2004, 2:01 am
- Location: El Paso Tx U.S
- Contact:
Re: 1.8 V6 - Engine Tuning
How did this shop tune it?
also I assume you have never driven a de mx3 or a ze mx3? its a world of a difference to even a tunned de.. i made 160 whp with just bolt ons. It felt like 200.
also I assume you have never driven a de mx3 or a ze mx3? its a world of a difference to even a tunned de.. i made 160 whp with just bolt ons. It felt like 200.
-hec
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
Re: 1.8 V6 - Engine Tuning
The chip is called here UNICHIP,this company is the only one in Romania who can do that,not only to my car!They are very good in what they do!They didnt replace my ECU or changed something to it!They simple came with a piece of paper where is my ECU positioned,and some things about wires,and then they came out with the UNICHIP(UNICHIP its a small ecu or chip,whatever),they have selected carefully they wires from my original ECU to the UNICHIP,and then the DYNO test and then made the necessary adjustments to the mixture of gasoline and air, I do not know exactly what adjustments were made because I do not know so well! certain is that the result of what they have done there, and the car runs like crazy
Attention ...
I have a japanesse car and i dont hesitate to use it
V6 baby![Razz :P](./images/smilies/icon_razz.gif)
I have a japanesse car and i dont hesitate to use it
V6 baby
![Razz :P](./images/smilies/icon_razz.gif)
Re: 1.8 V6 - Engine Tuning
I like how the chart says vtech tuning.
![Image](http://i659.photobucket.com/albums/uu316/93vtecklr/ClintsSig2.jpg)
1993 Blaze Red SE, 17" blackie's, b+m sts, 45 deg 3" exh pipe/intake tube, K8ZE, aftmkt probe headers, magnaflow hi-cat, all 2.5" piping, magnaflow muffler.
1976 Datsun 620 p/u, full airride, Firestone 2600`s, 16ga fuel cell, Optima yellow top, AZ compressor, custom tubular frame with 9in step notch, 18" 100 spokes
1955 Willys Overland 4x4 P/U, '78 LT1 350 cu.in, fully restored.