Page 3 of 5

Re: October Drag Board

Posted: June 24th, 2003, 12:55 am
by mx3TT
I wish there was a track close to where I am. I think the closest one is about 2 hours away. I guess I will head down there once I get my tranny and GTX ECU and harness hooked up to my BPT.

Re: October Drag Board

Posted: June 24th, 2003, 2:32 am
by cjthor
Well I ran at the track...But I dont think Imma post my times til I get my traction problems figured out....

Re: October Drag Board

Posted: June 24th, 2003, 1:40 pm
by 94mx3rsr
DUMP AT 2500RPM LIKE ME AND YOU SHOULDNT HAVE ANY PROBLEMS<p>YOU WILL END UP DOING 60FT OF 2.3 -2.4 BUT HEY...

Re: October Drag Board

Posted: June 24th, 2003, 1:54 pm
by cjthor
<blockquote><font size="1" face="Verdana, Arial">quote:</font><hr>Originally posted by 94mx3rsr:
DUMP AT 2500RPM LIKE ME AND YOU SHOULDNT HAVE ANY PROBLEMS<p>YOU WILL END UP DOING 60FT OF 2.3 -2.4 BUT HEY...<hr></blockquote>
If I "dump" it I have severe wheel hop and it feels like the front end is coming apart. Not a good thing.

Re: October Drag Board

Posted: June 24th, 2003, 2:15 pm
by 992mmx3
Get the srd control arm bushings, should help a little with the wheels hop. Slicks maybe?? :shrug:

Re: October Drag Board

Posted: June 24th, 2003, 3:57 pm
by cjthor
<blockquote><font size="1" face="Verdana, Arial">quote:</font><hr>Originally posted by 992mmx3:
Get the srd control arm bushings, should help a little with the wheels hop. Slicks maybe?? ;)

Re: October Drag Board

Posted: July 7th, 2003, 7:22 pm
by aaronthehic
I was getting alot of hop out of the motor mount flex so inserts would be a good investment too.

Re: October Drag Board

Posted: July 13th, 2003, 4:45 pm
by torpedan
i Finally made it to a 1/4 mile :D <p>
15.9513 86.64 MPH<p>Mods are BPD, severe weight reduction, cai, 1 7/8's catback, test pipe, and one bad motor mount that made enough wheelhop to have my teeth chatter... :roll:

Re: October Drag Board

Posted: July 13th, 2003, 6:20 pm
by aaronthehic
15.9513 <p>4th decimal? where did you go ? nasa :D <p>thanks for the times , dave is going to be pissed you bumped him :D :D<p>[ July 13, 2003: Message edited by: aaron the hic ]</p>

Re: October Drag Board

Posted: July 13th, 2003, 6:28 pm
by torpedan
hehehe yeah he prolly will be.. but it shouldnt take long before someone bumps me either.. It was actually at the san antonio raceeway.. kinda odd but yeah its the exact time ;)

Re: October Drag Board

Posted: July 21st, 2003, 3:23 pm
by 1SICKMX6
Put the slicks on and ran Friday night...<p>You can now put me up for a 14.067 @ 97.55mph<p>60FT time was 1.921 and I still have a bum second gear, I wasn't even going to race but after going down with arron on Wensday I got the ich back!<p>Later 1SICKMX6!

Re: October Drag Board

Posted: August 14th, 2003, 11:53 am
by aaronthehic
wed best run<p>r/t .814<p>60' 1.959<p>330' 5.511<p>1/8 8.416@ 84.76mph<p>1000 10.951<p>1/4 13.087@ 105.68mph<p>the car has a twelve i just need to learn how to drive it

Re: October Drag Board

Posted: August 15th, 2003, 2:49 pm
by lazzyie
Aaron and Brandon you guys are my heroes!!! Keep it up. One of these days I will make it to a track after I fix about 12 things....

Re: October Drag Board

Posted: September 14th, 2003, 1:29 pm
by aaronthehic
saturday night was good<p>my car was the almost the slowest car there<p>there was a talon running a 12.1 @ 117<p>and a probe gt with a built motor ,a turbo and a laptop to program it running 12.5 @ 112<p>here is my best of the nightwith my cat in cause i couldn't get it out<p>rt- .573<p>60'- 1.899<p>330'- 5.474<p>1/8- 8.395 @ 84.91mph<p>1/4- 13.023 @ 105.13mph<p>brandon was there and ran a 13.8 @ 99 NA

Re: October Drag Board

Posted: September 22nd, 2003, 9:58 pm
by Mradio
Aaron, do you have any pics of your car? Did you install plexiglass hatch? Where did u get that done?