MX-3.com

Well, what I did is pull off disty cap and spray outside/inside with WD40, sprayed connections to disty, put dielectric grease on spark plug wires, inside disty cap. It still was stumbling at times, then I've ran some red bottle IsoHeet and so far I haven't had problems.

Issue came up when I was driving on highway back in May. I later took a look at it and my rubber intake boot (accordion pipe) had a slit in it. Wrapped it real good with electrical tape and now it runs great again.

I had been lucky with that pipe, while I was using it, with no issues but that is know n to happen. Good to hear it was something easy to solve.