MX-3.com

I'm with Moon... I don't recognize that bar, and I've tried to pull the lower seatbelt mounts from a few 94+ models, with no luck.. All rusty, which is no longer a problem, since I now have a blast cabinet.

any pics yet Mooneggs?

Sorry forgot to update. I went to the junkyard and the 94 was actually a 93/94 hybrid so it didn't have the manual belts. However I saw an older 323 that had something similar. Is this how the setup is that you have? If so then I have never seen that before in an mx-3.

I have a similar thing in my 93' MX-3. It's basically exactly the same, but black.

Thanks for the pics. Yes my setup is exactly the same and black as well. My stuff came from a Canadian Escort.

Wyt, does your car have a cover over the area I have in the pic on the first post or is yours like the pic above?

as an update I took some pics of the setup in Josh's 94 US Spec GS. Note he is missing the plastic cover over the bolt in the floor.

hey i dont have the cover for the bolt that holds the seatbelt on the side, but i have both covers that cover the bolt that hold the seat into the floor bord