Page 2 of 2
Re: wont start flooding on start up?
Posted: March 26th, 2010, 9:55 pm
by johnmx3ze
Mi|<E wrote:Check the injector wiring, unless you had this same MS running before?
Not enough background to know whether you did or not
Is there a pool of gas in any of the cylinders?
If yes then one or more injector is on all the time
since i fixed my clt sensor its not really flooding anymore, atleast not like when my clt wasn't working
Re: wont start flooding on start up?
Posted: March 26th, 2010, 10:01 pm
by Mi|<E
Ah ok good, dry off those spark plugs and let it sit with them out for an hour
to dry the cylinders out then try again.
Re: wont start flooding on start up?
Posted: March 26th, 2010, 10:05 pm
by johnmx3ze
Mi|<E wrote:Ah ok good, dry off those spark plugs and let it sit with them out for an hour
to dry the cylinders out then try again.
tried that lol...
seriouly i think i tried everything...
but keep the ideas comming... maybe we can figure something out...
again thanks guys!
Re: wont start flooding on start up?
Posted: March 26th, 2010, 11:40 pm
by Ryan
I know its obvious, but vac leak? Try playing with the throttle? Charge the battery again. A weak battery makes everything weak. Starter speed, spark strength...
Re: wont start flooding on start up?
Posted: March 27th, 2010, 8:11 am
by Daninski
With my limited knowledge of your set up is it possible your introducting too much pressure and blowing the FPR's. Can you put a gauge on the fuel line and check the pressure?
Re: wont start flooding on start up?
Posted: April 1st, 2010, 7:00 pm
by johnmx3ze
ok its still not starting...
when i try to start it the first time, it starts but then dies 3 secs after...
but when i unpluged the 2 injectors rails, the car starts and idles abit till there no fuel left...
i just did a couple of datalogs so i can send them to people that would like to help me figure out what going on...
1 log with the injectors pluged and one log with the injectors unpluged...
i also have my msq that i could send too...
so please anyone if you know abit about ms please help me so i can get that car running before paint on thuesday...
thx
Re: wont start flooding on start up?
Posted: April 2nd, 2010, 4:25 pm
by johnmx3ze
gimme ur emails so i can send you the logs!
Re: wont start flooding on start up?
Posted: April 2nd, 2010, 10:02 pm
by johnmx3ze
im now ready to give 300$ to anyone that can make it run!
Re: wont start flooding on start up?
Posted: February 2nd, 2011, 4:20 pm
by mitchell_jarvis
hey john, seems like you have some experience with flooding, i have a question, i just bought a mx3 with a klze, and other morning whens he went out to start the car, its only started for a few seconds then flooded itself, have any idea why? i tried replacing the maf, pcv, fpr.