MX-3.com

nos92mx3 wrote:IIRC that line in front is just a power steering cooling line. I **THINK** its low pressure so you can just cut the line and replace with a smaller rubber section, and some hose clamps.

I do that and its works fine. I just eliminate that line and jumped the line with a rubber line and wala!!

you dont have to take it off do like i did...





[imghttp://i470.photobucket.com/albums/rr69/johnmx3ze/DSC01626.jpg][/img]

Bo0sted_Rafi wrote:

nos92mx3 wrote:IIRC that line in front is just a power steering cooling line. I **THINK** its low pressure so you can just cut the line and replace with a smaller rubber section, and some hose clamps.

I do that and its works fine. I just eliminate that line and jumped the line with a rubber line and wala!!

DO NOT replace power steering fluid with just any old hose. PS fluid reacts with heater hose. The section replaced MUST be certified for PS fluids.

For more info see Dsportmag Vol.70 October2008

The best way to go manual steering is with a 323 Rack. (Use the search with that). You CAN just cut the lines and take off the pump, but its not the best way. The 323 Rack does have a longer lock to lock ratio though.