Page 2 of 2
Re: injector opinions (yes i searched)
Posted: April 2nd, 2008, 5:54 pm
by Nomad_69er
Sorry for jumping into the thread but I was just curious if those same DSM injectors would fit into a B6D? I've been searching for better injectors for years and have been unsuccessful because no one can guarantee me!! Thanks!!
Re: injector opinions (yes i searched)
Posted: April 2nd, 2008, 6:43 pm
by nos92mx3
Now B6d you mean the DOHC mx3 head?
If so, then yes i believe you will have to use a few washers as spacers for the fuel rail but other than that they work fine
Re: injector opinions (yes i searched)
Posted: August 18th, 2008, 12:22 am
by RS_OBD'oh_2
Soooo.. the accel 410 dsm injectors were for the wrong gen. I've had them for quite some time and never really taken a good look at em. I got my new fuel rail in the other day and they do not fit. Just to clear things up, the 410cc dsm high Z injectors for the 420A do not work in ours.
Will be getting the rx7 460's or maybe 550cc's. I just did some reading and found out that the AEM F/IC does not have the 50% limit like many of the other piggys.
I'm not sure if anyone cares anymore... just might be nice to get a correct answer... I didn't.
$200.00 + down the drain.
