MX-3.com

Gro currently I have the same MS8 Vacuum hook up issue as u. Do u have any pictures of your engine bay and where you hooked everything up?

Originally posted by babyblueMX3:
normally the millenia US mani and ze are the same except the ze has a casting line mark on top (round shape) of the manifold..so yeah gro has the ms8

not all US spec are like that, i got one from a 97 Millenia, dont have a casting

Originally posted by Talon_66:
Gro currently I have the same MS8 Vacuum hook up issue as u. Do u have any pictures of your engine bay and where you hooked everything up?

KK this is the way i hooked mine up, and what i found out in my research.

Looking at my picture above...there are 5 nipples, but there is a 6th on the #6 cylinder runner that i didn't circle.

1: is the brake booster hookup for RIGHT HAND DRIVE cars. For LEFT HANd drive cars, this was used for the ABS hookup. On my manifold, it is plugged

2: This is for both VRIS solenoids. Hook it up like the stock manifold is hooked up (a t-fitting coming from both solenoids going through the two vac chambers and a checkvalve

3: Used for brake booster on LEFT HAND DRIVE cars. ABS module on RHD cars only. I used it for my brake booster.

4: used for the PCV valve on valve cover. I looped my hose around to fit it properly.

5: Used for purge control. Since the millenia manifold doens't have a hookup for cruise control, I just T-fitted this with both the purge and my cruise control.

6 (not circled): on #6 runner. is for the fuel pressure regulator solenoid.

this should be in FAQ or something, i'm sure everyone who swaps manifolds on KLZEs would enjoy having this around =) I'm doing the swap in a couple of weeks and I know this will help me with the vac lines

i will be doing one here in a few months, i would love to have this around, save for it only covers the pre 95 intakes, i have a post 95 and its a bit different

Take a pic of post-95 manifold!! WHen I did my research, i found more about those than the pre 95's, so I'd be able to help label those too.

Originally posted by papa roached:

Originally posted by babyblueMX3:
normally the millenia US mani and ze are the same except the ze has a casting line mark on top (round shape) of the manifold..so yeah gro has the ms8

not all US spec are like that, i got one from a 97 Millenia, dont have a casting

you don't have a casting mark and that what i said you don't have a casting mark...only ze curve neck (ms8) does..never saw saw a domestic millenia manifold with this casting line on top