MX-3.com

projectB10 wrote: ↑January 10th, 2021, 3:12 am

atx_mx3 wrote: ↑January 7th, 2021, 1:39 pm Bump

I'll be updating this soon for the 11 people that still visit this board and the 3 that will actually read this post.....

Hi. Greetings from 1 of the 3. Great to see this post and your subsequent ones. Congratulations on the quality of the work. Keep the posts coming.

Chris

Thanks Chris!

Snow in Austin, sleepless nights and solenoids.

The 300k mile Maz get plenty of love throughout the week.

NTK crank sensor - Code 2 and random complete loss of power/rpm after warm up
A new set of Injectors (Mx-6 Blue) -Apparently the old injectors were rebuilt once (dated 11/18/03) And sadly, 2 of the new injectors came out of the box DOA Replacements should be here Tuesday
Working VRIS solenoids - Thanks SE!
Working EGR solenoids - Thanks SE!
And for the first time in a couple years, no CEL.

Today I have to tackle the poor connection at the cooling fan relay. If I push the relay to one side (Ten/GND jumper) the fan will come on, but in its normal position does not have a good connection on the power feed side to the cooling fan. I have already disassembled the fuse box on the SE to see what I'm up against.