stock BPD horsepower??

4-Cyl. Technical/Performance Discussions
Post Reply
User avatar
Joey's mx
Regular Member
Posts: 929
Joined: April 1st, 2004, 2:01 am
Location: Canada
Contact:

stock BPD horsepower??

Post by Joey's mx »

Hey guys just wondering what the stock horsepower is for the BPD engines..I heard 210?? Just finding info before swaping!! Thanks
User avatar
papa roached
Senior Member
Posts: 2761
Joined: December 10th, 2002, 2:01 am
Location: Montgomery, WVa

Re: stock BPD horsepower??

Post by papa roached »

its 127 or so, the BPT from the 323 GT-R has 210
93 MX-3 GS (collecting parts for Eunos Presso conversion), 94 626 Transmission (4.10 gears), KL31 camed KL-ZE, Millenia intake, Millenia TB, SSAutochrome V2 headers, Magnaflow cat, 2 1/4 in pipe, Top Speed Pro 1 muffler, 9lb Fidanza Flywheel, ACT clutch, Corksport SS clutch line, Corksport SS brake lines, Unorthadox UDP, 255 lph fuel pump, HEI mod, ghetto-charger intake, KL36 ECU, SRD transverse crossmember bushings, SRD shifter extention bushing, SRD crossmember, Corksport bronzoil shifter bushings, Brembo Crossdrilled and Slotted rotors, 15 inch Konig Heliums, ZX-2 S/R struts, Eibach lowering springs, OEM front strut bar, Ebay rear strut bar, BFGoodrich G-Force T/A KDWs

Parts needing installed: turbo kit from BB (if i ever get it), 9.0:1 CR Diamond pistons, 4340 forged H beam rods, C/J-Spec spoiler, Nissan red tops in KL rails
http://www.cardomain.com/id/blazejeremy
torpedan
Regular Member
Posts: 1430
Joined: January 5th, 2002, 2:01 am
Location: DFW

Re: stock BPD horsepower??

Post by torpedan »

Here is a good like to all the info ya need.

http://web2.iadfw.net/theman/protegefaq/engine.html
-torp.
I don't own a Mazda.
User avatar
Joey's mx
Regular Member
Posts: 929
Joined: April 1st, 2004, 2:01 am
Location: Canada
Contact:

Re: stock BPD horsepower??

Post by Joey's mx »

Thanks guys I meant the BPT engine!! SO 210 thats good!
User avatar
papa roached
Senior Member
Posts: 2761
Joined: December 10th, 2002, 2:01 am
Location: Montgomery, WVa

Re: stock BPD horsepower??

Post by papa roached »

normal BPTs make 180, the GT-R BPT makes 210 and is VERY hard to find
93 MX-3 GS (collecting parts for Eunos Presso conversion), 94 626 Transmission (4.10 gears), KL31 camed KL-ZE, Millenia intake, Millenia TB, SSAutochrome V2 headers, Magnaflow cat, 2 1/4 in pipe, Top Speed Pro 1 muffler, 9lb Fidanza Flywheel, ACT clutch, Corksport SS clutch line, Corksport SS brake lines, Unorthadox UDP, 255 lph fuel pump, HEI mod, ghetto-charger intake, KL36 ECU, SRD transverse crossmember bushings, SRD shifter extention bushing, SRD crossmember, Corksport bronzoil shifter bushings, Brembo Crossdrilled and Slotted rotors, 15 inch Konig Heliums, ZX-2 S/R struts, Eibach lowering springs, OEM front strut bar, Ebay rear strut bar, BFGoodrich G-Force T/A KDWs

Parts needing installed: turbo kit from BB (if i ever get it), 9.0:1 CR Diamond pistons, 4340 forged H beam rods, C/J-Spec spoiler, Nissan red tops in KL rails
http://www.cardomain.com/id/blazejeremy
User avatar
babyblueMX3
Supporting Member
Posts: 3755
Joined: February 23rd, 2003, 2:01 am
Location: Gatineau,Quebec,Canada
Contact:

Re: stock BPD horsepower??

Post by babyblueMX3 »

I don't know much about the 4 cylinder engines...but does the gtr ever came in america in some car or it's only found in japan?...
RIP 400whp ZE-T MX-3
Current car : Golf 01 GTI 1.8T (15 psi)
User avatar
atlantamx3
Supporting Member
Posts: 2888
Joined: June 2nd, 2001, 2:01 am
Location: Kennesaw, Ga, USA
Contact:

Re: stock BPD horsepower??

Post by atlantamx3 »

Never came to the States.

I think it was in Japan, Australia, & a few other countries though.
~Perry
Please visit
http://www.mx3-atlanta.com
Image
User avatar
babyblueMX3
Supporting Member
Posts: 3755
Joined: February 23rd, 2003, 2:01 am
Location: Gatineau,Quebec,Canada
Contact:

Re: stock BPD horsepower??

Post by babyblueMX3 »

oh I see..so a guy I know was BS me because he was saying that he bought a gtr that came in a 323 here in Canada.. :freak:
RIP 400whp ZE-T MX-3
Current car : Golf 01 GTI 1.8T (15 psi)
natural born honda killer
Regular Member
Posts: 500
Joined: April 16th, 2001, 2:01 am
Location: Lewisville, texas
Contact:

Re: stock BPD horsepower??

Post by natural born honda killer »

no it may not be bs because motors can be imported. i personally have a gtr in my mx-3. if you want a bpt motor in your car id go with the gtx 180 hp rather then the gtr 210 hp because you most likely will not find one. if you do consider yourself lucky to find it. good luck on the search.
jeremy cline
95 MX-3 RS
The only BPT GTR MX-3 in Texas!!!

man iraq sucks!!!
User avatar
babyblueMX3
Supporting Member
Posts: 3755
Joined: February 23rd, 2003, 2:01 am
Location: Gatineau,Quebec,Canada
Contact:

Re: stock BPD horsepower??

Post by babyblueMX3 »

Originally posted by natural born honda killer:
no it may not be bs because motors can be imported. i personally have a gtr in my mx-3. if you want a bpt motor in your car id go with the gtx 180 hp rather then the gtr 210 hp because you most likely will not find one. if you do consider yourself lucky to find it. good luck on the search.
I know engine can be imported..but what I meant is the guy bought an engine that was stock in a 323 saying it was a gtr.
RIP 400whp ZE-T MX-3
Current car : Golf 01 GTI 1.8T (15 psi)
User avatar
Joey's mx
Regular Member
Posts: 929
Joined: April 1st, 2004, 2:01 am
Location: Canada
Contact:

Re: stock BPD horsepower??

Post by Joey's mx »

I am getting the gt-r BPT!! I have no problems finding those motors where I live. There are 4 shops that import motors and they all carry them!! thanks
User avatar
jaydog5678
Regular Member
Posts: 1043
Joined: March 27th, 2002, 2:01 am
Location: Marietta, GA,
Contact:

Re: stock BPD horsepower??

Post by jaydog5678 »

Originally posted by Taillon:
I am getting the gt-r BPT!! I have no problems finding those motors where I live. There are 4 shops that import motors and they all carry them!! thanks
Hook a brother up!! :D :D
xXdaveXx
Regular Member
Posts: 97
Joined: March 15th, 2004, 2:01 am
Location: Central America,El salvador

Re: stock BPD horsepower??

Post by xXdaveXx »

:rant2:
Post Reply

Return to “4-Cyl. Technical/Performance”