Check engine warning light...

General Mazda MX-3 Discussions
Post Reply
estaminet
Junior Member
Posts: 2
Joined: August 21st, 2002, 2:01 am
Location: Fredericton, New Brunswick Canada

Check engine warning light...

Post by estaminet »

Hi - I have a 96 4-cyl (manual transmission) Precidia (60,000 km. The check engine warning light trips on every couple months - I've taken to the dealer every time and the code is 170. The last time I had it checked, the light tripped on again the next day. There are no other problems... has anyone else had this problem? The dealer has another MX-3 in today for the same problem, and he said he'd let me konw what they found.<P>And, this may sound strange, but has anyone experienced a "hesitating" accelerator?<P>Thanks for any advice!
FroSTeD
Regular Member
Posts: 164
Joined: July 18th, 2002, 2:01 am
Location: Montréal, Qc

Re: Check engine warning light...

Post by FroSTeD »

I think it might be due to the oxygen sensor. Mine is a little bit rusted and I think it's what make the engine light light up. It mostly happen on the highway when I keep the same speed (when I'm over 100km/h).<P>The light goes off after a couple of seconds.<P>I haven't checked any code yet.<P>Buy the way, would it be a good thing to change my oxygen sensor? Would there be any improvements?
estaminet
Junior Member
Posts: 2
Joined: August 21st, 2002, 2:01 am
Location: Fredericton, New Brunswick Canada

Re: Check engine warning light...

Post by estaminet »

Clarification: my check engine light trips on and stays on (even after I turn off the engine & re-start, it'll come on)until I take it to the dealer to have it re-set...
voltaire
Regular Member
Posts: 261
Joined: August 20th, 2002, 2:01 am
Location: Ft. Lauderdale

Re: Check engine warning light...

Post by voltaire »

I'm pretty sure the codes are all two digits, so I don't know what the heck a '170' is. Maybe it's a '17' code. Here's the list of possible codes:<P>02 'NE2' crankshaft position sensor<P>03 'G' camshaft position sensor<P>04 'NE1' camshaft/crankshaft position <BR>sensor<P>05 Knock sensor<P>08 Volume Air Flow sensor (VAF)<P>09 Coolant temperature sensor (CTS)<P>10 Intake air temperature sensor (IAT)<P>12 Throttle position sensor (TPS)<P>14 Barometric pressure sensor<P>15 LHO2S inactivation error<P>16 Exhaust gas recirculation (EGR) system<P>17 LHO2S inversion error<P>23 RHO2S inactivation error<P>24 RHO2S inversion error<P>25 Fuel pressure regulator control solenoid<P>26 Canister purge solenoid <P>28 EGR vacuum solenoid <P>29 EGR vent solenoid <P>34 Idle air control (IAC) solenoid<P>41 VRIS #1 solenoid <P>46 VRIS #2 solenoid
Mastirmynd
Regular Member
Posts: 325
Joined: August 9th, 2002, 2:01 am
Location: Virginia

Re: Check engine warning light...

Post by Mastirmynd »

My check engine light comes on rather frequently as well. Usually on extended highway trips, but sometimes just when im driving arround. And my accelleration seems to hesitate sometimes in 2nd gear (embarrasing when about to eat a civic for breakfast on the way to class) Usually running a mild octane booster or fuel system cleaner takes care of both problems for a while. [img]shrug.gif"%20border="0[/img]
Build A Man A Fire, He Will Be Warm For A Night. Set A Man On Fire, He Will Be Warm For The Rest Of His Life.
<img src="http://www.bareend.com/mazdaspeed.gif" alt=" - " />
User avatar
Shades
Regular Member
Posts: 944
Joined: February 7th, 2002, 2:01 am
Location: Vancouver, BC, Canada
Contact:

Re: Check engine warning light...

Post by Shades »

I know this won't solve your problem, but to reset your check engine light, I just disconnected the negative battery terminal for a while...
Image
JoN - Ex-Automotive Machinist Journeyman/Refrigeration Mechanic Apprentice
1996 Mazda MX-3 RS - Creek Blue Mica

RACING BP fully built with Twin Scroll GT3071R TURBO @ +30psi - Specs and Pictures

"Do it ONCE, do it RIGHT!"
Post Reply

Return to “General Mazda MX-3”