Need help w/ bumper

General Mazda MX-3 Discussions
Post Reply
CrazyLilMike
Regular Member
Posts: 68
Joined: March 13th, 2001, 2:01 am
Location: Holland,Michigan,USA

Need help w/ bumper

Post by CrazyLilMike »

I just ordered a fx-712 bumper from fx designs. Will it look bad without side skirts? I do have 17s, but when i put them on it raised my car somewhere between 1-2 inches. I bought lowering springs from jeff abrahms so when i get em on it should be around stock. Please lemme know. mike avila
white fish
Regular Member
Posts: 1073
Joined: November 16th, 2000, 2:01 am
Location: Toronto Canada
Contact:

Re: Need help w/ bumper

Post by white fish »

I have 215\40\17 thats the same size diameter as the OEM rims and tires<P>Maybe you should buy a lower profile tire!<BR> Image Image Image
CrazyLilMike
Regular Member
Posts: 68
Joined: March 13th, 2001, 2:01 am
Location: Holland,Michigan,USA

Re: Need help w/ bumper

Post by CrazyLilMike »

Maybe my stock height was originally what it is now. When i bought my car it came with stock 14 alloys w/ blizzak snow tires. What is the stock height of the 94 mx-3 rs in inches from the front bumper? And my tires are 215/40ZR17 m+s. Does the ZR or m+s mean anything important? I originally bought my 17 by 9 oz's used from a friend. What kind of tire would i need? Mike Avila Slowly getting pimped out 1994 mx-3 RS
CrazyLilMike
Regular Member
Posts: 68
Joined: March 13th, 2001, 2:01 am
Location: Holland,Michigan,USA

Re: Need help w/ bumper

Post by CrazyLilMike »

Another question. Will i be able to see the front turning signals when i put on the fx-712 bumper? Also, how much larger is the fx bumper? Will i be able to ride with suspension techniques lowering springs and a fx-712? How low off the ground will i be? Will is still be able to drive In the winter?????? Mike Avila<P>Had a mx-3 for 6 months!!!
Post Reply

Return to “General Mazda MX-3”