Installing Power Windows from a GS to a RS?... Have you
-
Shades
- Regular Member
- Posts: 944
- Joined: February 7th, 2002, 2:01 am
- Location: Vancouver, BC, Canada
- Contact:
Installing Power Windows from a GS to a RS?... Have you
Wondering if anyone has installed power windows from a GS into a RS?<P>What parts would I need? I would assume that you could keep the windows you have now?
JoN - Ex-Automotive Machinist Journeyman/Refrigeration Mechanic Apprentice
1996 Mazda MX-3 RS - Creek Blue Mica
RACING BP fully built with Twin Scroll GT3071R TURBO @ +30psi - Specs and Pictures
"Do it ONCE, do it RIGHT!"
-
rayrrod
- Regular Member
- Posts: 334
- Joined: October 13th, 2001, 2:01 am
- Location: Houston, Texas
- Contact:
Re: Installing Power Windows from a GS to a RS?... Have you
Ya I have done it. Went to the local junk yard. Took all parts off and installed them on the RS. Took me most of the day since i am not too handy. Had to take out the wiring , switches, even took out the "touch" thingy and put it in the front part of my door. Used a dremel for that. Only bad thing is I have a hole in each inside door where the handle was since i also did the electric door switches while i was at it
-
Shades
- Regular Member
- Posts: 944
- Joined: February 7th, 2002, 2:01 am
- Location: Vancouver, BC, Canada
- Contact:
Re: Installing Power Windows from a GS to a RS?... Have you
Sweet... thanks man.<P>If I have any question I'll e-mail you if you don't mind.
JoN - Ex-Automotive Machinist Journeyman/Refrigeration Mechanic Apprentice
1996 Mazda MX-3 RS - Creek Blue Mica
RACING BP fully built with Twin Scroll GT3071R TURBO @ +30psi - Specs and Pictures
"Do it ONCE, do it RIGHT!"