I need to replace my axle seal on my trans. I went to Advance and bought the driver's side output shaft seal. It is most definitely the wrong seal. Can someone direct me to the correct seal via part number or link? Sorry to ask such a basic question, but the seal got totally ripped up in removal and I can't identify it by seeing it.
Thank you guys.
Manual transmission axle seal, please help
Manual transmission axle seal, please help
92 MX-3 ZE "The draggin' wagon"
Colt cams and bolt-ons
Colt cams and bolt-ons
- KaBa
- Junior Member
- Posts: 26
- Joined: August 4th, 2014, 11:41 pm
- antispam: ~SPAM*SUX~
- Location: Lower Mainland, BC
Re: Manual transmission axle seal, please help
Did this last week... skf 14006
1996 MX-3 GSR Silver Stone 5 spd 4.11:1
1993 MX-3 GS Clear White Auto -> 5 spd 4.39:1
1993 MX-3 GS Blaze Red 5 spd - traded
1993 MX-3 GS Clear White Auto -> 5 spd 4.39:1
1993 MX-3 GS Blaze Red 5 spd - traded
Re: Manual transmission axle seal, please help
And just to be absolutely sure...
1992 mx-3 GS tranny,
The seal where the cv inserts into the transmission, right?
1992 mx-3 GS tranny,
The seal where the cv inserts into the transmission, right?
92 MX-3 ZE "The draggin' wagon"
Colt cams and bolt-ons
Colt cams and bolt-ons
- KaBa
- Junior Member
- Posts: 26
- Joined: August 4th, 2014, 11:41 pm
- antispam: ~SPAM*SUX~
- Location: Lower Mainland, BC
Re: Manual transmission axle seal, please help
http://www.rockauto.com/catalog/x,carco ... type,10066
Yep, that's the one.
Yep, that's the one.
1996 MX-3 GSR Silver Stone 5 spd 4.11:1
1993 MX-3 GS Clear White Auto -> 5 spd 4.39:1
1993 MX-3 GS Blaze Red 5 spd - traded
1993 MX-3 GS Clear White Auto -> 5 spd 4.39:1
1993 MX-3 GS Blaze Red 5 spd - traded
Re: Manual transmission axle seal, please help
Beck/Arnley Drive Axle Flange/Output Shaft Seal Part No. 052-3520 is what you need from Advance just did mine in March.
- mitmaks
- Senior Member
- Posts: 8704
- Joined: September 10th, 2001, 2:01 am
- antispam: ~SPAM*SUX~
- Location: Spokane, WA
- Contact:
Re: Manual transmission axle seal, please help
I went to napa and they were able to match it.
Magnum s/s lines, strut bars, carbon fiber bezel, indiglow gauge, Sony Xplod, inverted c/f hood, SRD lower tie bar '93 GS SE '95 Cobra SVT #2722 '68 Charger R/T 440
http://www.cardomain.com/id/mitmaks
http://www.cardomain.com/id/mitmaks