[FS] Mx-3 parts - lots of inventory - MUST LOOK!
-
- Regular Member
- Posts: 76
- Joined: November 5th, 2011, 6:14 pm
- antispam: No
[FS] Mx-3 parts - lots of inventory - MUST LOOK!
UPDATE -
All parts in U.S$$
1.8 BP DOHC engine parts
These were run in my previous engine that had a ring failure. All parts were cleaned and inspected for damage and wear. They are all in like new condition, ready to be re-assembled in and 1.8 BP cyl head. Estimated miles - less than 3000.
Supertech 1mm oversize valves - brand new valves not installed - did open 2 packages - $200
Supertech titanium retainers, springs, and seats. Cotters (keepers) come with them - $280
Carrillo H beam connecting rods - $400
1 micro polished, BP 22mm long nose crankshaft - $200
1 BP throttle body 90-94 - $50
1 BP throttle body 95+ - $50
BP-T oil pan - $50
BP-T intake manifold BP26 - $50
BP-T cams BP26 with lifters - $75
various other BP engine parts - valve covers, brackets etc.. ask me
1.6 B6 engine parts 94-95
94 B6 DOHC flywheel - $50
A/C components for 94 DOHC 4 cyl - inquire
MISC parts -
RC engineering 550cc injectors - SOLD
Set of 4 15x7 multispoke wheels mounted on 205/50/15 Kumho V710 race tires - $200
spare 2 tires - same Kumho V710's - $50
rear cargo cover from my car - $50
stainless scuff guards (side sills) for Mx-3. SOLD
left and right front O.E. fenders BLACk color - $80
various gauge clusters for V-6 and 4 cyl - diff miles on them - pic upon request - $25 each
O.E taillights and Alteza lights - $30 for each pair - Alteza lights SOLD
Parting out 92 V-6 GS
window motor/regulators for power windows, left and right - $30 each
V-6 engine wire harness - $50
KL31 ECU - SOLD
KLZE 31 cams - SOLD Still have cyl heads
KLZE intake manifold - $40
KL light weight aluminum flywheel with Clutchmasters clutch and pressure plate - SOLD
KLZE underdrive crank pulley - $40
V-6 power steering pump - $25
V-6 engine mounts - $40
KLZE throttle body - $50
K8 V-6 transaxle - $300 - shipping may be around $100 - trans has over 150k but is in working order
V-6 axles and intermediate shaft - $25 each for axles - $30 for interm. shaft
rear rotors for Mx-3 Brembo new - SOLD
Hot Shot headers for V-6 - I DO HAVE GASKETS, no bolts or nuts - $75
Mx-3 GS power steering rack $60
NEW LISTINGS -
Master power window switch - $86 - Shipped
V-6 starter - $80
UPDATED 8/6/13
All parts in U.S$$
1.8 BP DOHC engine parts
These were run in my previous engine that had a ring failure. All parts were cleaned and inspected for damage and wear. They are all in like new condition, ready to be re-assembled in and 1.8 BP cyl head. Estimated miles - less than 3000.
Supertech 1mm oversize valves - brand new valves not installed - did open 2 packages - $200
Supertech titanium retainers, springs, and seats. Cotters (keepers) come with them - $280
Carrillo H beam connecting rods - $400
1 micro polished, BP 22mm long nose crankshaft - $200
1 BP throttle body 90-94 - $50
1 BP throttle body 95+ - $50
BP-T oil pan - $50
BP-T intake manifold BP26 - $50
BP-T cams BP26 with lifters - $75
various other BP engine parts - valve covers, brackets etc.. ask me
1.6 B6 engine parts 94-95
94 B6 DOHC flywheel - $50
A/C components for 94 DOHC 4 cyl - inquire
MISC parts -
RC engineering 550cc injectors - SOLD
Set of 4 15x7 multispoke wheels mounted on 205/50/15 Kumho V710 race tires - $200
spare 2 tires - same Kumho V710's - $50
rear cargo cover from my car - $50
stainless scuff guards (side sills) for Mx-3. SOLD
left and right front O.E. fenders BLACk color - $80
various gauge clusters for V-6 and 4 cyl - diff miles on them - pic upon request - $25 each
O.E taillights and Alteza lights - $30 for each pair - Alteza lights SOLD
Parting out 92 V-6 GS
window motor/regulators for power windows, left and right - $30 each
V-6 engine wire harness - $50
KL31 ECU - SOLD
KLZE 31 cams - SOLD Still have cyl heads
KLZE intake manifold - $40
KL light weight aluminum flywheel with Clutchmasters clutch and pressure plate - SOLD
KLZE underdrive crank pulley - $40
V-6 power steering pump - $25
V-6 engine mounts - $40
KLZE throttle body - $50
K8 V-6 transaxle - $300 - shipping may be around $100 - trans has over 150k but is in working order
V-6 axles and intermediate shaft - $25 each for axles - $30 for interm. shaft
rear rotors for Mx-3 Brembo new - SOLD
Hot Shot headers for V-6 - I DO HAVE GASKETS, no bolts or nuts - $75
Mx-3 GS power steering rack $60
NEW LISTINGS -
Master power window switch - $86 - Shipped
V-6 starter - $80
UPDATED 8/6/13
Last edited by jaydog is back on August 6th, 2013, 9:29 am, edited 2 times in total.
-
- Regular Member
- Posts: 1614
- Joined: November 5th, 2011, 8:32 pm
- antispam: ~SPAM*SUX~
- Location: Calgary, Alberta
Re: [FS] Mx-3 parts - lots of inventory - MUST LOOK!
Dibs on those SS sills.
Also, have you got a BP g series mechanical speedo gear and cable?
And are they just the regular Protege BP VCs?
Also, have you got a BP g series mechanical speedo gear and cable?
And are they just the regular Protege BP VCs?
Daninski wrote:This is my MX3. There are many like it, but this one is mine. My MX3 is my best friend. It is my life. I must master it as I master my life. My MX3, without me, is useless. Without my MX3, I am useless. I must fire up my MX3 true. I must drive straighter than any Honda driver who is trying to own me. I must own him before he owns me.
- Surgeonasst222
- Regular Member
- Posts: 486
- Joined: February 10th, 2013, 10:05 am
- antispam: ~SPAM*SUX~
- Location: Allegan, MI
Re: [FS] Mx-3 parts - lots of inventory - MUST LOOK!
Dibsjaydog is back wrote:
rear hatch shade from my car - $50 - pics upon request
stainless scuff guards (side sills) for Mx-3. These are O.E in fair condition - $30 - pics upon request
O.E Alteza lights - $30 for each pair
rear rotors for Mx-3 Brembo new - $30
![Wink ;)](./images/smilies/icon_wink.gif)
![Cool 8)](./images/smilies/icon_cool.gif)
Pm'ed
Kegan
Mazda3 2012 - my NEW DD
Mazda MX-3 RS 1992 - my project
Ford Focus SE 2010 - sold
Ford Focus SE 2003 - sold
Mazda MX-3 RS 1994 - sold![Sad :(](./images/smilies/icon_sad.gif)
![Mr. Green :mrgreen:](./images/smilies/icon_mrgreen.gif)
Mazda MX-3 RS 1992 - my project
Ford Focus SE 2010 - sold
Ford Focus SE 2003 - sold
Mazda MX-3 RS 1994 - sold
![Sad :(](./images/smilies/icon_sad.gif)
-
- Regular Member
- Posts: 1614
- Joined: November 5th, 2011, 8:32 pm
- antispam: ~SPAM*SUX~
- Location: Calgary, Alberta
Re: [FS] Mx-3 parts - lots of inventory - MUST LOOK!
Would also like a 92-93RS gauge cluster if you've got one.
Daninski wrote:This is my MX3. There are many like it, but this one is mine. My MX3 is my best friend. It is my life. I must master it as I master my life. My MX3, without me, is useless. Without my MX3, I am useless. I must fire up my MX3 true. I must drive straighter than any Honda driver who is trying to own me. I must own him before he owns me.
- Surgeonasst222
- Regular Member
- Posts: 486
- Joined: February 10th, 2013, 10:05 am
- antispam: ~SPAM*SUX~
- Location: Allegan, MI
Re: [FS] Mx-3 parts - lots of inventory - MUST LOOK!
RobMinhas wrote:Dibs on those SS sills.
Also, have you got a BP g series mechanical speedo gear and cable?
And are they just the regular Protege BP VCs?
Dammit rob! 2 min before me!!!
![Crying or Very sad :cry:](./images/smilies/icon_cry.gif)
Fine dibs on the rest of what I said.... Grrrr
![Rant2 :rant2:](./images/smilies/rant2.gif)
Mazda3 2012 - my NEW DD
Mazda MX-3 RS 1992 - my project
Ford Focus SE 2010 - sold
Ford Focus SE 2003 - sold
Mazda MX-3 RS 1994 - sold![Sad :(](./images/smilies/icon_sad.gif)
![Mr. Green :mrgreen:](./images/smilies/icon_mrgreen.gif)
Mazda MX-3 RS 1992 - my project
Ford Focus SE 2010 - sold
Ford Focus SE 2003 - sold
Mazda MX-3 RS 1994 - sold
![Sad :(](./images/smilies/icon_sad.gif)
- kulluminati777
- Senior Member
- Posts: 2509
- Joined: July 11th, 2010, 11:10 am
- antispam: ~SPAM*SUX~
- Location: Sunny California
- Contact:
Re: [FS] Mx-3 parts - lots of inventory - MUST LOOK!
ill take the KL31 ECU and are the hot shot headers already good to bolt up or do you have to chop and mod anything?
- mx3_ryder
- Regular Member
- Posts: 371
- Joined: November 2nd, 2012, 8:40 am
- antispam: No
- Location: Troy, VT
Re: [FS] Mx-3 parts - lots of inventory - MUST LOOK!
Looking for both inner front plastic fender shrouds in good condition and rear license plate/marker light assy/harness ?
![Image](http://i1286.photobucket.com/albums/a620/Chris_Columbia/BE18151_zps54759237.jpg)
![Image](http://i1286.photobucket.com/albums/a620/Chris_Columbia/BE11391_zps050b7f1c.jpg)
![Image](http://i1286.photobucket.com/albums/a620/Chris_Columbia/BE18151_zps54759237.jpg)
![Image](http://i1286.photobucket.com/albums/a620/Chris_Columbia/BE11391_zps050b7f1c.jpg)
-
- Regular Member
- Posts: 76
- Joined: November 5th, 2011, 6:14 pm
- antispam: No
Re: [FS] Mx-3 parts - lots of inventory - MUST LOOK!
I am getting swamped with E-mails guys. I will get to everybody asap.
I don't have the inner fender liners. I do have the rear taillight section harness from a 92 GS that I am parting out though. $20 and you can have it.
I don't have the inner fender liners. I do have the rear taillight section harness from a 92 GS that I am parting out though. $20 and you can have it.
- AaronTietje
- Regular Member
- Posts: 1196
- Joined: August 21st, 2009, 5:24 pm
- antispam: No
- Location: Prattsburgh NY
Re: [FS] Mx-3 parts - lots of inventory - MUST LOOK!
Are these injectors a "drop-in" for the BP??? I'll be going megasquirt, so wiring them up wouldn't be a problem.
We all want to be fast and look cool. Cool changes but fast never does.
-
- Regular Member
- Posts: 76
- Joined: November 5th, 2011, 6:14 pm
- antispam: No
Re: [FS] Mx-3 parts - lots of inventory - MUST LOOK!
Mx-3_Ryder, I do have the inner fender liners from the GS I have. sorry about that.
Definitely. The harness to the injectors will have to be Mistu style or an older Honda type connectors for these injectors.AaronTietje wrote:Are these injectors a "drop-in" for the BP??? I'll be going megasquirt, so wiring them up wouldn't be a problem.
-
- Regular Member
- Posts: 423
- Joined: September 26th, 2011, 6:30 am
- antispam: ~SPAM*SUX~
- Location: USA,PA
Re: [FS] Mx-3 parts - lots of inventory - MUST LOOK!
KL light weight aluminum flywheel with Clutchmasters clutch and pressure plate - $150
rear hatch shade from my car - $50 - pics upon request
stainless scuff guards (side sills) for Mx-3. These are O.E in fair condition - $30 - pics upon request
interested in these, i realize the sills have been spoken for but if they back out I have cash in hand. pm as well
rear hatch shade from my car - $50 - pics upon request
stainless scuff guards (side sills) for Mx-3. These are O.E in fair condition - $30 - pics upon request
interested in these, i realize the sills have been spoken for but if they back out I have cash in hand. pm as well
- Surgeonasst222
- Regular Member
- Posts: 486
- Joined: February 10th, 2013, 10:05 am
- antispam: ~SPAM*SUX~
- Location: Allegan, MI
Re: [FS] Mx-3 parts - lots of inventory - MUST LOOK!
FYI spoke for the hatch shade yesterday... Sry fez
Mazda3 2012 - my NEW DD
Mazda MX-3 RS 1992 - my project
Ford Focus SE 2010 - sold
Ford Focus SE 2003 - sold
Mazda MX-3 RS 1994 - sold![Sad :(](./images/smilies/icon_sad.gif)
![Mr. Green :mrgreen:](./images/smilies/icon_mrgreen.gif)
Mazda MX-3 RS 1992 - my project
Ford Focus SE 2010 - sold
Ford Focus SE 2003 - sold
Mazda MX-3 RS 1994 - sold
![Sad :(](./images/smilies/icon_sad.gif)
- MrMazda92
- Supporting Member
- Posts: 5201
- Joined: October 8th, 2009, 5:35 pm
- antispam: No
- Location: Midwest
Re: [FS] Mx-3 parts - lots of inventory - MUST LOOK!
Interested in both of these.jaydog is back wrote:
stainless scuff guards (side sills) for Mx-3. These are O.E in fair condition - $30 - pics upon request
KLZE underdrive crank pulley - $40
Daily:
'12 Challenger R/T + STP - 3.92 w/ LSD, JG Cam, headers, SkipShift delete, Clutch Delay Valve delete, Hurst STS, RAM Clutch Adjuster, StopTech 6 Piston Brakes, Sticky Nittos, 435 WHP
Kid Hauler:
'08 Suburban LT 4WD - TVS 1900 Blower, LF SC Cam, headers, AFM delete, true 5" lift, 33x12s, 523 WHP
First Love:
'92 GS 5 spd - Straightneck KL/67mm TB, MegaSquirt/Coilpacks, 5 lugs/Speed6 brakes/FD wheels, wiretuck, coilovers, headers, AEM WB, Borla
Deleted: VAF/Power Steering/Air Conditioning/EGR/ABS/Auto Seatbelts/etc
'12 Challenger R/T + STP - 3.92 w/ LSD, JG Cam, headers, SkipShift delete, Clutch Delay Valve delete, Hurst STS, RAM Clutch Adjuster, StopTech 6 Piston Brakes, Sticky Nittos, 435 WHP
Kid Hauler:
'08 Suburban LT 4WD - TVS 1900 Blower, LF SC Cam, headers, AFM delete, true 5" lift, 33x12s, 523 WHP
First Love:
'92 GS 5 spd - Straightneck KL/67mm TB, MegaSquirt/Coilpacks, 5 lugs/Speed6 brakes/FD wheels, wiretuck, coilovers, headers, AEM WB, Borla
Deleted: VAF/Power Steering/Air Conditioning/EGR/ABS/Auto Seatbelts/etc
-
- Regular Member
- Posts: 76
- Joined: November 5th, 2011, 6:14 pm
- antispam: No
Re: [FS] Mx-3 parts - lots of inventory - MUST LOOK!
You will have to move the cat-con back a little so there is modification to the exhaust, however I do have a cat-back exhaust made for a V-6 Mx-3 that is on my 92 GS...kulluminati777 wrote:ill take the KL31 ECU and are the hot shot headers already good to bolt up or do you have to chop and mod anything?
The Hotshots were originally made for Probes and Mx-6's as you may know.
- tehbrookzorz
- Regular Member
- Posts: 1561
- Joined: April 29th, 2006, 6:59 pm
- Location: Calgary, Alberta