catch can breather or no? why?

4-Cyl. Technical/Performance Discussions
Post Reply
User avatar
wednesdayslatest
Regular Member
Posts: 251
Joined: April 16th, 2009, 2:05 am
antispam: No
Location: Lowell, MA

Re: catch can breather or no? why?

Post by wednesdayslatest »

Josh wrote:Yeah that is a little jacked up. I did not remember the sohc being like that. What I would do if I were you is just run one. I would run it on the PCV side.
That is what is going to cause it to smoke. The other one you could probably block off if you wanted. But I would clean it all out with carb cleaner.

Usually it goes from the PCV to the intake tube not the IM directly.

ill probably just do one for now and clean it again and put carb cleaner in there and see how it goes before i change the intake. i would assume that i have to have both hoses connected (i also have a 1.6L rs there must be a difference between the 1.6 and 1.8 sohc)

thanks for the advice
03 Dodge Neon (rental i had for a month but i ran that into the ground for sure)
95 Chrysler Concorde (Junked my first car [still ran])
90 Nissan Stanza (Junked [wouldnt start one day])
89 Saab 9000 CD (sedan/turbo very fun but electrical problems[city towed away for no plates on private property])
94 Toyota Camry (mothers old car fixed it then broke it[dont ask] Junked)
93 MX-3 RS (My project for 3 years so far)
97 Honda Civshit (Beater/Stereotypical POS Honda im fixing)
Top
Post Reply

Return to “4-Cyl. Technical/Performance”