kulluminati777 - 1993 マツダスピード MX-3 You will be missed
- kulluminati777
- Senior Member
- Posts: 2509
- Joined: July 11th, 2010, 11:10 am
- antispam: ~SPAM*SUX~
- Location: Sunny California
- Contact:
Re: kulluminati777's Two week challenge......
I havnet really noticed if its when the brakes are applied or not. I did notice that it happens if i turned the air in the car on past 2. If i turn it off it stops surging. But the car is already idling high. 1500rpm is when it will surge i was told and the load of the fan gets it to that RPM...
-
- Regular Member
- Posts: 1614
- Joined: November 5th, 2011, 8:32 pm
- antispam: ~SPAM*SUX~
- Location: Calgary, Alberta
Re: kulluminati777's Two week challenge......
I think I'm finally catching up here, you v6 boys are confusing me with your talk of fans and feeler gauges hahah.
This is some IAC bulls--- then? Personally I'd just through parts at it but thats stupid hahahha.
Have you taken it into the shop yet?
This is some IAC bulls--- then? Personally I'd just through parts at it but thats stupid hahahha.
Have you taken it into the shop yet?
Daninski wrote:This is my MX3. There are many like it, but this one is mine. My MX3 is my best friend. It is my life. I must master it as I master my life. My MX3, without me, is useless. Without my MX3, I am useless. I must fire up my MX3 true. I must drive straighter than any Honda driver who is trying to own me. I must own him before he owns me.
- kulluminati777
- Senior Member
- Posts: 2509
- Joined: July 11th, 2010, 11:10 am
- antispam: ~SPAM*SUX~
- Location: Sunny California
- Contact:
Re: kulluminati777's Two week challenge......
no not yet, i was going to call josh this weekend and try the DIY method one more time but i got busy doing other things.
![Crying :crying:](./images/smilies/crying.gif)
![Crying :crying:](./images/smilies/crying.gif)
![Crying :crying:](./images/smilies/crying.gif)
-
- Regular Member
- Posts: 1614
- Joined: November 5th, 2011, 8:32 pm
- antispam: ~SPAM*SUX~
- Location: Calgary, Alberta
Re: kulluminati777's Two week challenge......
Do it dude! Josh knows his s---, I'm sure he can help you set it straight!kulluminati777 wrote:no not yet, i was going to call josh this weekend and try the DIY method one more time but i got busy doing other things.![]()
Daninski wrote:This is my MX3. There are many like it, but this one is mine. My MX3 is my best friend. It is my life. I must master it as I master my life. My MX3, without me, is useless. Without my MX3, I am useless. I must fire up my MX3 true. I must drive straighter than any Honda driver who is trying to own me. I must own him before he owns me.
- Surgeonasst222
- Regular Member
- Posts: 486
- Joined: February 10th, 2013, 10:05 am
- antispam: ~SPAM*SUX~
- Location: Allegan, MI
Re: kulluminati777's Two week challenge......
Just pay for him to come down or take him to get some eats.... That sounds better...kulluminati777 wrote:no not yet, i was going to call josh this weekend and try the DIY method one more time but i got busy doing other things.![]()
Mazda3 2012 - my NEW DD
Mazda MX-3 RS 1992 - my project
Ford Focus SE 2010 - sold
Ford Focus SE 2003 - sold
Mazda MX-3 RS 1994 - sold![Sad :(](./images/smilies/icon_sad.gif)
![Mr. Green :mrgreen:](./images/smilies/icon_mrgreen.gif)
Mazda MX-3 RS 1992 - my project
Ford Focus SE 2010 - sold
Ford Focus SE 2003 - sold
Mazda MX-3 RS 1994 - sold
![Sad :(](./images/smilies/icon_sad.gif)
- kulluminati777
- Senior Member
- Posts: 2509
- Joined: July 11th, 2010, 11:10 am
- antispam: ~SPAM*SUX~
- Location: Sunny California
- Contact:
Re: kulluminati777's Two week challenge......
Surgeonasst222 wrote:Just pay for him to come down or take him to get some eats.... That sounds better...kulluminati777 wrote:no not yet, i was going to call josh this weekend and try the DIY method one more time but i got busy doing other things.![]()
![Laughing :lol:](./images/smilies/icon_lol.gif)
![Laughing :lol:](./images/smilies/icon_lol.gif)
![Laughing :lol:](./images/smilies/icon_lol.gif)
its a loooong drive from washington to california. I know because I just did it to do the KLZE swap lol
- Surgeonasst222
- Regular Member
- Posts: 486
- Joined: February 10th, 2013, 10:05 am
- antispam: ~SPAM*SUX~
- Location: Allegan, MI
Re: kulluminati777's Two week challenge......
I know that ![Smile :)](./images/smilies/icon_smile.gif)
But if you want it fixed and fixed right a full day with josh should do it
Hopefully...
![Smile :)](./images/smilies/icon_smile.gif)
But if you want it fixed and fixed right a full day with josh should do it
![Smile :)](./images/smilies/icon_smile.gif)
Hopefully...
Mazda3 2012 - my NEW DD
Mazda MX-3 RS 1992 - my project
Ford Focus SE 2010 - sold
Ford Focus SE 2003 - sold
Mazda MX-3 RS 1994 - sold![Sad :(](./images/smilies/icon_sad.gif)
![Mr. Green :mrgreen:](./images/smilies/icon_mrgreen.gif)
Mazda MX-3 RS 1992 - my project
Ford Focus SE 2010 - sold
Ford Focus SE 2003 - sold
Mazda MX-3 RS 1994 - sold
![Sad :(](./images/smilies/icon_sad.gif)
- kulluminati777
- Senior Member
- Posts: 2509
- Joined: July 11th, 2010, 11:10 am
- antispam: ~SPAM*SUX~
- Location: Sunny California
- Contact:
Re: kulluminati777's Two week challenge......
Surgeonasst222 wrote:I know that
But if you want it fixed and fixed right a full day with josh should do it![]()
Hopefully...
AH ok
Soooooooo
Im not sure if I fixed my problem BUT i did put a band aid on it......
I went to the pick and pull around the corner and got ANOTHER KL47 throttle body off a millenia. I also discovered the kl01 DE IAC valves are a little different. because i was first going to take a MX6´s IAC.....Didnt know that till now. I think its very weird how much difference there is between the K series engines but yet they are the same. What mazda should of done was just made 1 K series and detune it through the ECU for this application and have the ECU reach its full potential for that application. The different manifolds and all this other jazz im sure cost them LOST of cash in R & D....
Any way I got a new TB because i couldnt get the IAC off and only paid 50 bucks this time. The last guy charge me 90 because he recognized it had a TPS and IAC still on it.....D-bag he better hope i never catch him in a dark alley.....just kidding
![Laughing :lol:](./images/smilies/icon_lol.gif)
![Laughing :lol:](./images/smilies/icon_lol.gif)
Swapped TB´s and the idle was HIGH but not surging. Around 1500ish. So all I did was mess with the throttle linkage a bit and got the idle at 650ish rpms at idle.......Is my issue gone? Who knows. I bet if I would have fiddled with the linkage on the other TB it would be the same. So i didnt throw the TB away as it still may be good.........
- MrMazda92
- Supporting Member
- Posts: 5201
- Joined: October 8th, 2009, 5:35 pm
- antispam: No
- Location: Midwest
Re: kulluminati777's Two week challenge......
Ouch... You're throwing money at the problem man, you could seriously SOLVE the issue with 20 minutes of fiddling and diagnostics.
If you would feel more comfortable with an extra set of hands, I'm only in Eugene... It's not California, but it's sure as hell closer than Washington.
If you would feel more comfortable with an extra set of hands, I'm only in Eugene... It's not California, but it's sure as hell closer than Washington.
Daily:
'12 Challenger R/T + STP - 3.92 w/ LSD, JG Cam, headers, SkipShift delete, Clutch Delay Valve delete, Hurst STS, RAM Clutch Adjuster, StopTech 6 Piston Brakes, Sticky Nittos, 435 WHP
Kid Hauler:
'08 Suburban LT 4WD - TVS 1900 Blower, LF SC Cam, headers, AFM delete, true 5" lift, 33x12s, 523 WHP
First Love:
'92 GS 5 spd - Straightneck KL/67mm TB, MegaSquirt/Coilpacks, 5 lugs/Speed6 brakes/FD wheels, wiretuck, coilovers, headers, AEM WB, Borla
Deleted: VAF/Power Steering/Air Conditioning/EGR/ABS/Auto Seatbelts/etc
'12 Challenger R/T + STP - 3.92 w/ LSD, JG Cam, headers, SkipShift delete, Clutch Delay Valve delete, Hurst STS, RAM Clutch Adjuster, StopTech 6 Piston Brakes, Sticky Nittos, 435 WHP
Kid Hauler:
'08 Suburban LT 4WD - TVS 1900 Blower, LF SC Cam, headers, AFM delete, true 5" lift, 33x12s, 523 WHP
First Love:
'92 GS 5 spd - Straightneck KL/67mm TB, MegaSquirt/Coilpacks, 5 lugs/Speed6 brakes/FD wheels, wiretuck, coilovers, headers, AEM WB, Borla
Deleted: VAF/Power Steering/Air Conditioning/EGR/ABS/Auto Seatbelts/etc
- Surgeonasst222
- Regular Member
- Posts: 486
- Joined: February 10th, 2013, 10:05 am
- antispam: ~SPAM*SUX~
- Location: Allegan, MI
Re: kulluminati777's Two week challenge......
There take him up on thatMrMazda92 wrote:Ouch... You're throwing money at the problem man, you could seriously SOLVE the issue with 20 minutes of fiddling and diagnostics.
If you would feel more comfortable with an extra set of hands, I'm only in Eugene... It's not California, but it's sure as hell closer than Washington.
![Smile :)](./images/smilies/icon_smile.gif)
Btw if he comes down or if you go up, have him ship my dam mats
![Wink ;)](./images/smilies/icon_wink.gif)
Mazda3 2012 - my NEW DD
Mazda MX-3 RS 1992 - my project
Ford Focus SE 2010 - sold
Ford Focus SE 2003 - sold
Mazda MX-3 RS 1994 - sold![Sad :(](./images/smilies/icon_sad.gif)
![Mr. Green :mrgreen:](./images/smilies/icon_mrgreen.gif)
Mazda MX-3 RS 1992 - my project
Ford Focus SE 2010 - sold
Ford Focus SE 2003 - sold
Mazda MX-3 RS 1994 - sold
![Sad :(](./images/smilies/icon_sad.gif)
- mx3_ryder
- Regular Member
- Posts: 371
- Joined: November 2nd, 2012, 8:40 am
- antispam: No
- Location: Troy, VT
Re: kulluminati777's Two week challenge......
The linkage would cause high idle but not the surging. Drive it for awhile and see if your problem is gone. ![Very Happy :D](./images/smilies/icon_biggrin.gif)
![Very Happy :D](./images/smilies/icon_biggrin.gif)
- Mooneggs
- Forum Moderator
- Posts: 6128
- Joined: August 10th, 2005, 10:08 pm
- antispam: ~SPAM*SUX~
- Location: Hillsboro, OR
- Contact:
Re: kulluminati777's Two week challenge......
surging idle is totally normal for both my ZEs (depending on weather)... use the rear defrost to manage it. ![Freak :freak:](./images/smilies/freak.gif)
![Freak :freak:](./images/smilies/freak.gif)
My Feedback
92 mx-3 gs klze 'race car' IP 15.05 @ 92.5mph
92 mx-3 gs klze 'daily driver' IP 14.55 @ 95.7mph
http://www.cardomain.com/id/Mooneggs
![Image](http://i806.photobucket.com/albums/yy344/Mooneggz/laguna_seca_signature.jpg)
92 mx-3 gs klze 'race car' IP 15.05 @ 92.5mph
92 mx-3 gs klze 'daily driver' IP 14.55 @ 95.7mph
http://www.cardomain.com/id/Mooneggs
![Image](http://i806.photobucket.com/albums/yy344/Mooneggz/laguna_seca_signature.jpg)
-
- Regular Member
- Posts: 1614
- Joined: November 5th, 2011, 8:32 pm
- antispam: ~SPAM*SUX~
- Location: Calgary, Alberta
Re: kulluminati777's Two week challenge......
This....I like this...Mooneggs wrote:surging idle is totally normal for both my ZEs (depending on weather)... use the rear defrost to manage it.
Daninski wrote:This is my MX3. There are many like it, but this one is mine. My MX3 is my best friend. It is my life. I must master it as I master my life. My MX3, without me, is useless. Without my MX3, I am useless. I must fire up my MX3 true. I must drive straighter than any Honda driver who is trying to own me. I must own him before he owns me.
- Josh
- Supporting Member
- Posts: 3432
- Joined: April 18th, 2002, 2:01 am
- Location: Washington state
- Contact:
Re: kulluminati777's Two week challenge......
It is all in the throttle body. I cannot stand the bouncing idle. I drove around the car with it for like 10 months, bouncing 500 rmp, erratic idling at like 1200 rpm. It is annoying as all heck, quite literally took less than 20 min like Blake said. It is easy. The Idle needs to be reset in Diag mode. Once it is then BLAM it's done. I was really pissed at myself for not doing it sooner. It takes a paperclip, and a flat blade screwdriver. But might want to check all the positioning's on the TB to make sure. Once your base idle is set, then adjust the TPS.
Josh
95' AWD MX-3 RST - (work log - http://www.mx-3.com/phpBB3/viewtopic.php?f=46&t=73765 )
94' GS - KLZE DD (work log - viewtopic.php?uid=2713&f=46&t=79063&start=0 )
05' MS RX-8 - Parted out and Sold :'(
Feedback - http://www.mx-3.com/phpBB3/viewtopic.php?f=37&t=49519
Cardomain Page - http://www.cardomain.com/ride/408020
Face Book page http://www.facebook.com/pages/Mazda-MX- ... 3472959216
95' AWD MX-3 RST - (work log - http://www.mx-3.com/phpBB3/viewtopic.php?f=46&t=73765 )
94' GS - KLZE DD (work log - viewtopic.php?uid=2713&f=46&t=79063&start=0 )
05' MS RX-8 - Parted out and Sold :'(
Feedback - http://www.mx-3.com/phpBB3/viewtopic.php?f=37&t=49519
Cardomain Page - http://www.cardomain.com/ride/408020
Face Book page http://www.facebook.com/pages/Mazda-MX- ... 3472959216
- mx3_ryder
- Regular Member
- Posts: 371
- Joined: November 2nd, 2012, 8:40 am
- antispam: No
- Location: Troy, VT
Re: kulluminati777's Two week challenge......
Hey guys !! Adjusting your idle and TPS doesn't fix a broken IAC valve. ![Laughing :lol:](./images/smilies/icon_lol.gif)
![Laughing :lol:](./images/smilies/icon_lol.gif)