[WTB] 2.5 v6 throttle body

gerald_23 · Post by **gerald_23** » November 12th, 2011, 6:41 pm

Hey everyone. So I'm looking for the rubber intake pipe between the throttle body and the VAF. Also I have a broken throttle spring and I wanna replace it but seems to replace the throttle body is easier and easier to come by. I'm in Hamilton Ontario and I'm willing to pay for shipping for a fair price

gerald_23 · Post by **gerald_23** » November 12th, 2011, 6:50 pm

Forgot to mention I need the k8 throttle body and intake pipe

gerald_23 · Post by **gerald_23** » December 6th, 2011, 12:28 pm

Found it!

MrMazda92 · Post by **MrMazda92** » December 6th, 2011, 1:26 pm

The accordion tubing wears out and allows a lot of unmetered air into the engine. I recommend refurbishing any that you buy used, you can use a silicone type sealant to good effect, if you clean the tubing prior to application.

gerald_23 · Post by **gerald_23** » December 12th, 2011, 10:35 pm

Checked it all out and looks good but I see what you mean. A little sensor safe sealant around where it seals is not a bad idea

Daninski · Post by **Daninski** » December 12th, 2011, 10:41 pm

I got one in minty condition, if I had of seen this yesterday I could of got my son to bring it with him back to Hamilton. $15 + shipping if you still need it. If you want to wait my son can bring it down after he come up for Xmas. Silicone works but not for any length of time. If you can find a tube of butyl rubber that works best.

mazda915 · Post by **mazda915** » December 12th, 2011, 11:00 pm

i have a tb with tps and iac assembly its off a k8ze so its a lil dif but itll work pm if u want it 40$ and its urs !!

gerald_23 · Post by **gerald_23** » December 12th, 2011, 11:04 pm

Thank you guys but I found it about a week ago.

And yes Butyl rubber will probably be best. Right now I'm on the search for a JE-50 VAF and new springs and shocks. I will ask around but if nothing I will have to make another thread.

gerald_23 · Post by **gerald_23** » February 5th, 2012, 12:17 pm

So I gotta open up this post again. Turns out I need the 2.5 v6 throttle body. I was having issues with the one I had and I thought it was the wrong one but It turns out the tension spring is just bad and wasn't closing the throttle completely. So I'm looking for the throttle body in the left of the picture now.

Daninski · Post by **Daninski** » February 5th, 2012, 12:42 pm

Ya you posted asking for a 2.5 so I don't know how people get confused.

gerald_23 · Post by **gerald_23** » February 6th, 2012, 10:12 pm

No i can admit it was my mistake. I asked for a k8 throttle body originally. i thought that would fix my problem but it just made another one. So now I need a 2.5 v6 one

gerald_23 · Post by **gerald_23** » February 8th, 2012, 7:53 pm

gerald_23 · Post by **gerald_23** » February 12th, 2012, 1:48 am

gerald_23 · Post by **gerald_23** » February 20th, 2012, 10:50 am

Found it at a local scrap yard. all good now

gerald_23 · Post by **gerald_23** » February 20th, 2012, 10:52 am

Found it at a local scrap yard. all good now

MX-3.com

[WTB] 2.5 v6 throttle body

[WTB] 2.5 v6 throttle body

Re: [WTB] Stock intake pipe and throttle body

Re: [WTB] Stock intake pipe and throttle body

Re: [WTB] Stock intake pipe and throttle body

Re: [WTB] Stock intake pipe and throttle body

Re: [WTB] Stock intake pipe and throttle body

Re: [WTB] Stock intake pipe and throttle body

Re: [WTB] Stock intake pipe and throttle body

Re: [WTB] Stock intake pipe and throttle body

Re: [WTB] 2.5 v6 throttle body

Re: [WTB] 2.5 v6 throttle body

Re: [WTB] 2.5 v6 throttle body

Re: [WTB] 2.5 v6 throttle body

Re: [WTB] 2.5 v6 throttle body

Re: [WTB] 2.5 v6 throttle body