Track racing a KLDE/ZE swap
-
stereoking15
- Regular Member
- Posts: 326
- Joined: August 16th, 2005, 3:51 pm
- Location: Portland, OR USA!!!
Re: Track racing a KLDE/ZE swap
I changed my thermostat to a 160 degree from a proobe and have raced in 117 degree heat in medford oregon and never a problem, also i swear by the stuff add redline oil water wetter. Also try running a different mixture like 70% water and 30% coolant will also help.
94 gs ze swapped,front mount oil cooler,b&g springs, kyb gr2 struts, vris deleted, gutted, racing 4 point harness. centerforce dual friction clutch, BREMBO ROTORS X4, CARBOTECH XP10 front pads, ebc green stuff rear PADS, corksport brake lines & clutch line, hei mod w/ msd blaster 3, MAZDASPEED motor mounts, B&M short shifter, M-FACTORY LSD, Carbon fiber hatch with lexan window.
-
crazycanadian
- Regular Member
- Posts: 605
- Joined: September 3rd, 2006, 10:29 pm
- Location: Langley, BC
Re: Track racing a KLDE/ZE swap
What rads are you guys using.... I am putting together a list to look at when I go junk yard hunting..
I'll change the rad out eventually I am not in any rush to fix anything...
I'll change the rad out eventually I am not in any rush to fix anything...
-
stereoking15
- Regular Member
- Posts: 326
- Joined: August 16th, 2005, 3:51 pm
- Location: Portland, OR USA!!!
Re: Track racing a KLDE/ZE swap
stock gs rad with working dual fans 
94 gs ze swapped,front mount oil cooler,b&g springs, kyb gr2 struts, vris deleted, gutted, racing 4 point harness. centerforce dual friction clutch, BREMBO ROTORS X4, CARBOTECH XP10 front pads, ebc green stuff rear PADS, corksport brake lines & clutch line, hei mod w/ msd blaster 3, MAZDASPEED motor mounts, B&M short shifter, M-FACTORY LSD, Carbon fiber hatch with lexan window.