[GI] 92 MX-3 with BPT, show car quality
[GI] 92 MX-3 with BPT, show car quality
The economy has been beating me up pretty bad, and it looks like I am not going to be able to hold out much longer, as such, I may be looking to sell my project MX-3.
This car was built for show, in that I just cruised it around and took it to shows only, this was NOT my daily driver after I turned it into my project car in 2002. That being said, she is not a trailer queen, I drove her to each show, some as far as St. Louis, MO and Elkhard Lake, WI (I live right outside Chicago). When the engine was installed at Corksport, we drove her from Portland, OR to Chicago. For insurance reasons, the car was driven no more than 3,000 miles per year (with the exception of bringing her from OR after the swap). The chasis has 125000 miles on it, and the engine has 65,000 on it, very low miles!
Engine Dyno pulled 184.3 to the wheels.
Mazda JDM BPT GTX 1.8L Turbo
Custom Spearco Intercooler
MSD-6AL Ignition Control w/ Rev Control
MSD Blaster 2, 3 Series Coil
HKS Super Sequential BOV
OBX Racing Sports Fuel Rail
Aeromotive Fuel Pressure Regulator
NGK RC-ZX18 Blue Wires
NGK V-Power BKR6E-11 Spark Plugs
Cusco Polished Catch Can
iLL Garage Slim Fan
Mazdaspeed Oil Cap
2.25" Cat Back
Weapon R exhaust
NOS
Mazda Familia AE computer
AC Autotechnics Boost Gauge
AC Autotechnics Air/Fuel Guage
AC Autotechnics Volt Guage
Lotek Guage 3 Pod, Full Pillar
A'PEXi Auto Turbo Timer
Corksport Reverse Indigo Gauges
Intrax Super Sport springs
Tokiko struts
SRD Performance Rear Lower Tie Bar
Corksport Tower bars (front & back)
18" Rays G-games 77w rims
BF Goodrich Scorcher TA's 225-35-18 tires
Brembo drilled and slotted rotors (front)
ACT Street Performance clutch
Mazda Protogé LX transmission
Corksport Steel braided clutch line
Mazdaspeed "Evolution" seats
Mazdaspeed 4 point harness
MOMO "King" shift knob
MOMO polished boot connector
MOMO s--- boot
MOMO carbon fiber e-brake
MOMO e-brake boot
MOMO "Trek" steering wheel
MOMO steering wheel hub
Gemico CF style inserts
Mazdaspeed front bumper
FX Designs "Combat" side skirts
FX Designs "Combat" rear bumper
G3 Autosports "Invader" carbon fiber hood
Mazda JDM spoiler
Mazda JDM side marker
Projector Head lights
black "Alteeza" style rear lights
Sparco hood pins
Euro spec front turn signals
Panosonic CD/DVD Head Unit with 7" screen
4 Keenwood 6" speakers
4 Orion 10" speakers
Orion "Cobalt" amplifier
Sony Playstation 2
I will also turn over the original front and rear bumpers as well as any other parts I have, though I think all I have is a set of Fidanza cam gears I have not installed yet.
If you have any questions, please feel free to ask
$8k OBO
This car was built for show, in that I just cruised it around and took it to shows only, this was NOT my daily driver after I turned it into my project car in 2002. That being said, she is not a trailer queen, I drove her to each show, some as far as St. Louis, MO and Elkhard Lake, WI (I live right outside Chicago). When the engine was installed at Corksport, we drove her from Portland, OR to Chicago. For insurance reasons, the car was driven no more than 3,000 miles per year (with the exception of bringing her from OR after the swap). The chasis has 125000 miles on it, and the engine has 65,000 on it, very low miles!
Engine Dyno pulled 184.3 to the wheels.
Mazda JDM BPT GTX 1.8L Turbo
Custom Spearco Intercooler
MSD-6AL Ignition Control w/ Rev Control
MSD Blaster 2, 3 Series Coil
HKS Super Sequential BOV
OBX Racing Sports Fuel Rail
Aeromotive Fuel Pressure Regulator
NGK RC-ZX18 Blue Wires
NGK V-Power BKR6E-11 Spark Plugs
Cusco Polished Catch Can
iLL Garage Slim Fan
Mazdaspeed Oil Cap
2.25" Cat Back
Weapon R exhaust
NOS
Mazda Familia AE computer
AC Autotechnics Boost Gauge
AC Autotechnics Air/Fuel Guage
AC Autotechnics Volt Guage
Lotek Guage 3 Pod, Full Pillar
A'PEXi Auto Turbo Timer
Corksport Reverse Indigo Gauges
Intrax Super Sport springs
Tokiko struts
SRD Performance Rear Lower Tie Bar
Corksport Tower bars (front & back)
18" Rays G-games 77w rims
BF Goodrich Scorcher TA's 225-35-18 tires
Brembo drilled and slotted rotors (front)
ACT Street Performance clutch
Mazda Protogé LX transmission
Corksport Steel braided clutch line
Mazdaspeed "Evolution" seats
Mazdaspeed 4 point harness
MOMO "King" shift knob
MOMO polished boot connector
MOMO s--- boot
MOMO carbon fiber e-brake
MOMO e-brake boot
MOMO "Trek" steering wheel
MOMO steering wheel hub
Gemico CF style inserts
Mazdaspeed front bumper
FX Designs "Combat" side skirts
FX Designs "Combat" rear bumper
G3 Autosports "Invader" carbon fiber hood
Mazda JDM spoiler
Mazda JDM side marker
Projector Head lights
black "Alteeza" style rear lights
Sparco hood pins
Euro spec front turn signals
Panosonic CD/DVD Head Unit with 7" screen
4 Keenwood 6" speakers
4 Orion 10" speakers
Orion "Cobalt" amplifier
Sony Playstation 2
I will also turn over the original front and rear bumpers as well as any other parts I have, though I think all I have is a set of Fidanza cam gears I have not installed yet.
If you have any questions, please feel free to ask
$8k OBO
Last edited by wickedmx3 on June 5th, 2011, 9:32 pm, edited 3 times in total.
- Savin
- Regular Member
- Posts: 1580
- Joined: November 18th, 2007, 3:05 pm
- Location: Crown Point, IN (Chicago area)
- Contact:
Re: [GI] 92 MX-3 with BPT, show car quality
You can't get rid of it! You told me that it was going to get buried with you when you die!
'95 MX-3 RS - Project "Déjà Vu" Destined for the scrapyard.
'93 MX-3 GS - SOLD!
'93 MX-3 GS SE - Parts car!
'94 MX-3 GS - Scrapped
'94 MX-3 RS - Scrapped
'96 Sunfire SE - Scrapped
'03 Sunfire SE - Deathtrap
'95 Cavalier Base - Scrapped
'94 Thunderbird LX - Collects dust
'89 Mustang GT - SOLD!
'93 MX-3 GS - SOLD!
'93 MX-3 GS SE - Parts car!
'94 MX-3 GS - Scrapped
'94 MX-3 RS - Scrapped
'96 Sunfire SE - Scrapped
'03 Sunfire SE - Deathtrap
'95 Cavalier Base - Scrapped
'94 Thunderbird LX - Collects dust
'89 Mustang GT - SOLD!
Re: [GI] 92 MX-3 with BPT, show car quality
I'm getting buried now. Believe me, I don't do this easily, but my hope is that I can get it into the hands of someone that will appreciate her.
- Savin
- Regular Member
- Posts: 1580
- Joined: November 18th, 2007, 3:05 pm
- Location: Crown Point, IN (Chicago area)
- Contact:
Re: [GI] 92 MX-3 with BPT, show car quality
I hope you find that person that'd appreciate her too. I've always thought your mx-3 was truly amazing ever since I first got to see it and talk to you at HIN a few years ago.
'95 MX-3 RS - Project "Déjà Vu" Destined for the scrapyard.
'93 MX-3 GS - SOLD!
'93 MX-3 GS SE - Parts car!
'94 MX-3 GS - Scrapped
'94 MX-3 RS - Scrapped
'96 Sunfire SE - Scrapped
'03 Sunfire SE - Deathtrap
'95 Cavalier Base - Scrapped
'94 Thunderbird LX - Collects dust
'89 Mustang GT - SOLD!
'93 MX-3 GS - SOLD!
'93 MX-3 GS SE - Parts car!
'94 MX-3 GS - Scrapped
'94 MX-3 RS - Scrapped
'96 Sunfire SE - Scrapped
'03 Sunfire SE - Deathtrap
'95 Cavalier Base - Scrapped
'94 Thunderbird LX - Collects dust
'89 Mustang GT - SOLD!
Re: [GI] 92 MX-3 with BPT, show car quality
Yeah I know. Maybe you should be the one buying her.
- Savin
- Regular Member
- Posts: 1580
- Joined: November 18th, 2007, 3:05 pm
- Location: Crown Point, IN (Chicago area)
- Contact:
Re: [GI] 92 MX-3 with BPT, show car quality
If I had the money, I'd gladly buy her. Even if I could, she'd be forced to sit on the driveway and be vulnerable to the elements and the people that like to break into my cars. Your car surely doesn't deserve that fate.
'95 MX-3 RS - Project "Déjà Vu" Destined for the scrapyard.
'93 MX-3 GS - SOLD!
'93 MX-3 GS SE - Parts car!
'94 MX-3 GS - Scrapped
'94 MX-3 RS - Scrapped
'96 Sunfire SE - Scrapped
'03 Sunfire SE - Deathtrap
'95 Cavalier Base - Scrapped
'94 Thunderbird LX - Collects dust
'89 Mustang GT - SOLD!
'93 MX-3 GS - SOLD!
'93 MX-3 GS SE - Parts car!
'94 MX-3 GS - Scrapped
'94 MX-3 RS - Scrapped
'96 Sunfire SE - Scrapped
'03 Sunfire SE - Deathtrap
'95 Cavalier Base - Scrapped
'94 Thunderbird LX - Collects dust
'89 Mustang GT - SOLD!
-
- Forum Moderator
- Posts: 3415
- Joined: September 3rd, 2002, 2:01 am
- Location: Eastern Hemisphere
- Contact:
Re: [GI] 92 MX-3 with BPT, show car quality
Price needs to be posted.
08 Infiniti G37s 6speed (The Daily)
Stillen Cold Air Intake, Z1 Plenum Power Mod, Z1 Headers, Z1 Test Pipe, OBX (Ark) Exhaust, Up-Rev Osiris Engine Management (Tuned at Z1), 20x9" 20x10" Str Racing Concave Staggered Rims, SPC Camber kit, Tein H Techs Springs
01 Lexus Is300 (LS2 Project)
93 Mx3 SE 2.5 KLZE (sold it)
93 Mx3 GS 2.0 KFZE (killed it)
Stillen Cold Air Intake, Z1 Plenum Power Mod, Z1 Headers, Z1 Test Pipe, OBX (Ark) Exhaust, Up-Rev Osiris Engine Management (Tuned at Z1), 20x9" 20x10" Str Racing Concave Staggered Rims, SPC Camber kit, Tein H Techs Springs
01 Lexus Is300 (LS2 Project)
93 Mx3 SE 2.5 KLZE (sold it)
93 Mx3 GS 2.0 KFZE (killed it)
Re: [GI] 92 MX-3 with BPT, show car quality
PM sentMnemonic wrote:Price needs to be posted.
- solo_ryder
- Senior Member
- Posts: 6289
- Joined: October 16th, 2004, 2:01 am
- Location: British Columbia
Re: [GI] 92 MX-3 with BPT, show car quality
I dont think he is interested in the price.. its forum rules bro.
Nice looking mx tho, I wish there was more out there like this. Sadly, there isnt.
Nice looking mx tho, I wish there was more out there like this. Sadly, there isnt.
Re: [GI] 92 MX-3 with BPT, show car quality
This forum has plenty of hot MX-3's. There are a few owned by people here that make me drool!!!!
-
- Forum Moderator
- Posts: 3415
- Joined: September 3rd, 2002, 2:01 am
- Location: Eastern Hemisphere
- Contact:
Re: [GI] 92 MX-3 with BPT, show car quality
Rules and I'm interested in the price
Just looking to help skim out the people who are "Interested" and the people who are "Interested and can Afford"
No price, I'm very interested, FREE CAR, I CALL DIBS, I'll be there to grab her in less than 12 hours... JK
Just looking to help skim out the people who are "Interested" and the people who are "Interested and can Afford"
No price, I'm very interested, FREE CAR, I CALL DIBS, I'll be there to grab her in less than 12 hours... JK
08 Infiniti G37s 6speed (The Daily)
Stillen Cold Air Intake, Z1 Plenum Power Mod, Z1 Headers, Z1 Test Pipe, OBX (Ark) Exhaust, Up-Rev Osiris Engine Management (Tuned at Z1), 20x9" 20x10" Str Racing Concave Staggered Rims, SPC Camber kit, Tein H Techs Springs
01 Lexus Is300 (LS2 Project)
93 Mx3 SE 2.5 KLZE (sold it)
93 Mx3 GS 2.0 KFZE (killed it)
Stillen Cold Air Intake, Z1 Plenum Power Mod, Z1 Headers, Z1 Test Pipe, OBX (Ark) Exhaust, Up-Rev Osiris Engine Management (Tuned at Z1), 20x9" 20x10" Str Racing Concave Staggered Rims, SPC Camber kit, Tein H Techs Springs
01 Lexus Is300 (LS2 Project)
93 Mx3 SE 2.5 KLZE (sold it)
93 Mx3 GS 2.0 KFZE (killed it)
Re: [GI] 92 MX-3 with BPT, show car quality
If I had it, Id give ya 3-4k for it. GLWS.
Took the bp+t out of the mx and swapped it into a 95 escort wagon.
Re: [GI] 92 MX-3 with BPT, show car quality
Either post a price or remove the post. Pic's were very pretty but money talks right so post a price. Not sure why you waste your time, emotions are off to the left.
So are those pics recent?
So are those pics recent?
2004 Subaru WRX Silver, stage 2, minty interior.
2002 Subaru WRX Blue, SOLD (best E test numbers I've ever seen)
94 MX-6. Sold
92 GS KLZE 5 Speed
96 GS 5 speed, KLZE, Sold
95 GS Minty Shape Sold
92 GS Sold
92 GS Parts Car scrapped.
Feedback viewtopic.php?f=37&t=66348" onclick="window.open(this.href);return false;
7477th member.
I know you believe that you understand what you think I said but I'm sure you realize that what you heard is not what I meant.
2002 Subaru WRX Blue, SOLD (best E test numbers I've ever seen)
94 MX-6. Sold
92 GS KLZE 5 Speed
96 GS 5 speed, KLZE, Sold
95 GS Minty Shape Sold
92 GS Sold
92 GS Parts Car scrapped.
Feedback viewtopic.php?f=37&t=66348" onclick="window.open(this.href);return false;
7477th member.
I know you believe that you understand what you think I said but I'm sure you realize that what you heard is not what I meant.
Re: [GI] 92 MX-3 with BPT, show car quality
My wife and I are crunching the numbers, the mods gave a a little time to post the price since [GI] is a little of a grey area.Daninski wrote:Either post a price or remove the post. Pic's were very pretty but money talks right so post a price. Not sure why you waste your time, emotions are off to the left.
So are those pics recent?
The pictures towards the bottom are the most recent, being taken at the last show the car did, after the last mod installs were done (projectors, fuel rail, fuel pressure regulator, powder coating, the black chrome and some nick nacks)
I should have a cost up soon.
-
- Senior Member
- Posts: 2165
- Joined: December 7th, 2002, 2:01 am
- Location: windsor, ontario
- Contact:
Re: [GI] 92 MX-3 with BPT, show car quality
i remember seeing this car in person elvis sorry to see you leaving the group... i'm currently considering selling my awd mx-3 shell and trying to find a 94-96 one and start over with just a fwd setup..
anyone who is looking to have an amazing mx-3 this is it you won't regret picking this thing up
anyone who is looking to have an amazing mx-3 this is it you won't regret picking this thing up
ProjectMx
My BP and AWD build thread
Cardomain
93 Mx-3 GS with bp and GTR AWD system
93 Escort GT daily driving
My BP and AWD build thread
Cardomain
93 Mx-3 GS with bp and GTR AWD system
93 Escort GT daily driving