i have a few questions about a klze j-spec swap.
1) would the transmission off my 18L v6 fit on the Klze?
2) do i need to change my eco from an OBD-II to a OBD-I?
3) and would i need a different wiring harnes that the one i have?
4) last, are the motor mounts the same?
Klze swap
- mitchell_jarvis
- Regular Member
- Posts: 38
- Joined: May 23rd, 2010, 9:34 am
- antispam: ~SPAM*SUX~
- _-Night-Shade-_
- Senior Member
- Posts: 2664
- Joined: January 15th, 2009, 8:00 pm
- Location: Toronto, Ontario, Canada
Re: Klze swap
1)yes
2)no
3)no
4)yes
If you have any more questions you can find the answers to them by using the search function.
2)no
3)no
4)yes
If you have any more questions you can find the answers to them by using the search function.
-
- Regular Member
- Posts: 245
- Joined: June 18th, 2010, 12:47 am
- antispam: ~SPAM*SUX~
- Location: Medicine Hat Alberta
Re: Klze swap
1. Yes
2. Not sure
3. Nope
4. Yes
I haven't done the swap myself yet. I'm a new member but I've visited many times as a spectator. I've read many peoples swaps..night_shades WL being the most recent. So feel free to correct me if I'm wrong on anything I said.
edit- took me 4 minutes to write that....
2. Not sure
3. Nope
4. Yes
I haven't done the swap myself yet. I'm a new member but I've visited many times as a spectator. I've read many peoples swaps..night_shades WL being the most recent. So feel free to correct me if I'm wrong on anything I said.
edit- took me 4 minutes to write that....
93 mx-3 GS (KLZE w/kl01 cams, XTD stage 3 clutch, Outlaw intake/throttle body spacers, throttle body coolant delete, headers, full 2.5" exhaust w/resonator and 40 series flowmaster, filled engine mounts)
99 silverado
99 silverado
- SpatialTerror
- Regular Member
- Posts: 300
- Joined: October 10th, 2009, 1:12 am
- antispam: No
- Location: emmett,ID USA
- Contact:
Re: Klze swap
other than the intake manifold the k8 and the kl look identical. its just like swapping the same motor pretty much
93 GS-R with crank pulley racing clutch and flywheel, magnaflow cat back exhaust, short ram air, 12" rockford fosgate p2 subs, on a amp 500rms, jvc touch screen deck.work log --->http://mx-3.com/phpBB3/viewtopic.php?f=46&t=75217
92 RS with lowering springs, and body kit.
SpatialTerror
92 RS with lowering springs, and body kit.
SpatialTerror
- _-Night-Shade-_
- Senior Member
- Posts: 2664
- Joined: January 15th, 2009, 8:00 pm
- Location: Toronto, Ontario, Canada
Re: Klze swap
Let me correct myself about #2 - if it's manual then yes.
- slayer322
- Regular Member
- Posts: 125
- Joined: October 3rd, 2009, 11:41 pm
- antispam: No
- Location: Cambridge, Ontario
Re: Klze swap
^ what they said, pretty much everything is plug and play, exhaust work will be needed since the headers will be different
1996 Mazda MX-3 GS - DD / Always a project Car
ZE + Pacesetters = <3
ZE + Pacesetters = <3