is it possible to swap them?
if so... would i have any problems?
1992 MX3, RS..Sanded... Short shifter,Seat Covers;) , Fart can that sounds decent (:
1992 MX3, GS. Lowered, 18in. chrome rims., Blacked out Tails, Weird Bodykit.
Top is a Mass Air Flow MAF bottom is a Vane Air Flow VAF.
The mafs are newer technology and you will not be able to
swap one in place of a vaf unless you change the ecu and harness
to accomodate. Even then you would have a dohc ecu on a sohc
engine and I'm not sure that will work well.
there is no component in the GS VAF that measures mass. Its just a conical vane as apposed to a trap door vane.
what will likely be different is the resistance range, and the meters are designed with an ideal idle worked into the range... as in, the resistance change is not linear throught the travel of the vane. Playing with a multimeter will show this.
short answer, no. you can get adapter plates to adapt the square side to a circle though.Ebay.
Now with Moderator power!
Black '93 BP RS - wrecked, parted, scrapped.
Green GS - Sold.
Black GS - Summer DD/Race car - Fancy KLZE
Red GS - K8-ATX -> MTX-KLDE - Frakencar. Scrapped
White GS - Rusty. Parts. Scrapped
1997 BMW M3 - my summer baby
2002 BMW 325Xi - sold
2003 Forester Xti - EJ20K swapped. Feedback
1992 MX3, RS..Sanded... Short shifter,Seat Covers;) , Fart can that sounds decent (:
1992 MX3, GS. Lowered, 18in. chrome rims., Blacked out Tails, Weird Bodykit.
1992 MX3, RS..Sanded... Short shifter,Seat Covers;) , Fart can that sounds decent (:
1992 MX3, GS. Lowered, 18in. chrome rims., Blacked out Tails, Weird Bodykit.