The short of it:
Straight-neck 31-cammed ZE (Millenia IM/TB). Are valve cover gaskets for a PGT or MX-6GT or etc the correct fit?
My signature detailed rambling:
So... my mechanic uncle ordered a seal kit (likely generically for Mx-3) after my valve job. Couldn't use the IM gaskets among other things, and the VCGs in the kit seemed a little off. Now I know they are. Years ago I'd have known exactly what I needed, but a few maintanence-free years causes cobwebs. I could prob get a pic if necessary, but I know I'd just picked a set up (with good fitment) from a local parts store in the past. Any help would be appreciated.
Thanks, gurus!
Easy One: which VCG for ZE?
-
- Supporting Member
- Posts: 730
- Joined: January 11th, 2003, 2:01 am
- Location: Jacksonville, FL Area
Easy One: which VCG for ZE?
'93 GS sporting 31 ZE, 36 ECU, Millenia IM & TB, Beefed up tranny, Fidanza FW, CM Stage II-R, Al UDP, HS Headers, MF Hi-Flow CAT, 2.5" Piping, CAI, MGC Wires, MS Mounts, B&M SS, Bronzoils, SS B & C Lines, Brembos...more.
Oh yeah, I have a stock ATX 92 RS too.
"Everyone wants to live life in the fast lane; I have more fun weaving through traffic."
Oh yeah, I have a stock ATX 92 RS too.
"Everyone wants to live life in the fast lane; I have more fun weaving through traffic."
- PATDIESEL
- Senior Member
- Posts: 4476
- Joined: August 13th, 2001, 2:01 am
- antispam: ~SPAM*SUX~
- Location: Atlanta, GA.
Re: Easy One: which VCG for ZE?
The VCGs are the same for KLDE, KLZE and K8. So if your are a little off it is because they are F-ed up.
ZE -strait neck,headers,2.5 exhaust,pheno spacers,lower cross member,GC coils,MS struts,Brembo slotted rotors,filled MS mounts,SS brake/clutch lines, CAI,to rear bat reloc,Hella headlamps,Hella DE fogs 180WHP
Re: Easy One: which VCG for ZE?
Intake are different between K8, DE and ZE. Use Millenia ones for ZE.
2004 Subaru WRX Silver, stage 2, minty interior.
2002 Subaru WRX Blue, SOLD (best E test numbers I've ever seen)
94 MX-6. Sold
92 GS KLZE 5 Speed
96 GS 5 speed, KLZE, Sold
95 GS Minty Shape Sold
92 GS Sold
92 GS Parts Car scrapped.
Feedback viewtopic.php?f=37&t=66348" onclick="window.open(this.href);return false;
7477th member.
I know you believe that you understand what you think I said but I'm sure you realize that what you heard is not what I meant.
2002 Subaru WRX Blue, SOLD (best E test numbers I've ever seen)
94 MX-6. Sold
92 GS KLZE 5 Speed
96 GS 5 speed, KLZE, Sold
95 GS Minty Shape Sold
92 GS Sold
92 GS Parts Car scrapped.
Feedback viewtopic.php?f=37&t=66348" onclick="window.open(this.href);return false;
7477th member.
I know you believe that you understand what you think I said but I'm sure you realize that what you heard is not what I meant.
-
- Supporting Member
- Posts: 730
- Joined: January 11th, 2003, 2:01 am
- Location: Jacksonville, FL Area
Re: Easy One: which VCG for ZE?
Thanks for clearing cobwebs, PAT. That makes sense; they seemed a little cheap. I'll pick a new set up like years ago.
And thanks for your input, Dan. Because of the spacers I'll be getting another set of paper IM gaskets from Outlaw - already on their way.
I miss you guys.
And thanks for your input, Dan. Because of the spacers I'll be getting another set of paper IM gaskets from Outlaw - already on their way.
I miss you guys.
'93 GS sporting 31 ZE, 36 ECU, Millenia IM & TB, Beefed up tranny, Fidanza FW, CM Stage II-R, Al UDP, HS Headers, MF Hi-Flow CAT, 2.5" Piping, CAI, MGC Wires, MS Mounts, B&M SS, Bronzoils, SS B & C Lines, Brembos...more.
Oh yeah, I have a stock ATX 92 RS too.
"Everyone wants to live life in the fast lane; I have more fun weaving through traffic."
Oh yeah, I have a stock ATX 92 RS too.
"Everyone wants to live life in the fast lane; I have more fun weaving through traffic."