problems
problems
Ok so lat week end a finall started my swap i got the old and abused k8 out and changed every thing over to my klde like PS,Alt,AC,Egr to block off the hole on headers. I got my origanl flywheel resurfaced and have a spec stage II+ from http://www.horsepowerfreaks.com/partdet ... ge_2+/8163" onclick="window.open(this.href);return false;
and my problem looks like it could be the starter is hitten the presser plate. but i know my starter good and i have cranked it but when i go to start it just make a ticken sout like a dead battery but have jumped it and evrything charged the battery bought a new one but it still does the same thing.
has anyone had this problem of the starter not cranken the engine but is good??? battery tremanal are good and all my grounds are hooked up.
and my problem looks like it could be the starter is hitten the presser plate. but i know my starter good and i have cranked it but when i go to start it just make a ticken sout like a dead battery but have jumped it and evrything charged the battery bought a new one but it still does the same thing.
has anyone had this problem of the starter not cranken the engine but is good??? battery tremanal are good and all my grounds are hooked up.
92 mx-3 gs,klde,spec stage II+ clutch,awr 88mounts, remaned axles,CAI,seven nipple ditsy, new alpine speakers,panasonic 7'' dvd deck ,10'' kicker l5, hei mod, removed air box. 17 sortmaxs 10 spoke white nexan n700 tires
now wrote off with a watermelon sized dent in the driver side quater panel
93 mx-3 gs black klze fully loaded
now wrote off with a watermelon sized dent in the driver side quater panel
93 mx-3 gs black klze fully loaded
Re: problems
sorry for the grammer in a rush at school but i have got it to crank but only a half rotation and it started to tick again im still usen the stock tranny?
92 mx-3 gs,klde,spec stage II+ clutch,awr 88mounts, remaned axles,CAI,seven nipple ditsy, new alpine speakers,panasonic 7'' dvd deck ,10'' kicker l5, hei mod, removed air box. 17 sortmaxs 10 spoke white nexan n700 tires
now wrote off with a watermelon sized dent in the driver side quater panel
93 mx-3 gs black klze fully loaded
now wrote off with a watermelon sized dent in the driver side quater panel
93 mx-3 gs black klze fully loaded
- solo_ryder
- Senior Member
- Posts: 6289
- Joined: October 16th, 2004, 2:01 am
- Location: British Columbia
Re: problems
Well troubleshooting is always tricky right. This is what I would do:
Check all of your fuses, specially the ones in the engine bay
Check to make sure the ground nut is tight on the starter, sometimes they are loose and can cause a issue
Check the ground going from the starter to the ground plate on the tranny, make sure it is tight and there is no paint or corrosion there
Try another starter.
Was the flywheel the original k8 flywheel? And was the de a automatic when you got it?
Check all of your fuses, specially the ones in the engine bay
Check to make sure the ground nut is tight on the starter, sometimes they are loose and can cause a issue
Check the ground going from the starter to the ground plate on the tranny, make sure it is tight and there is no paint or corrosion there
Try another starter.
Was the flywheel the original k8 flywheel? And was the de a automatic when you got it?
Re: problems
Ok solo i hate trouble shooten but your right I have no idea if my klde had a automomatic tranny befor but I'm usen my mtx tranny and the the fuses are good its the first thing I check I have a remaned starter but they booth do the same thing and the ground for it I'd conected to the start all I have to connect to it is the powEr cord and the trigget is there sippar to be a spacer for the starter. And yeah I'm usen the k8 flywheel.
92 mx-3 gs,klde,spec stage II+ clutch,awr 88mounts, remaned axles,CAI,seven nipple ditsy, new alpine speakers,panasonic 7'' dvd deck ,10'' kicker l5, hei mod, removed air box. 17 sortmaxs 10 spoke white nexan n700 tires
now wrote off with a watermelon sized dent in the driver side quater panel
93 mx-3 gs black klze fully loaded
now wrote off with a watermelon sized dent in the driver side quater panel
93 mx-3 gs black klze fully loaded
-
- Regular Member
- Posts: 1083
- Joined: August 23rd, 2008, 12:09 am
- Location: Beamsville.
Re: problems
it shouldnt matter if it was atx or mtx before.
can you turn the engine over using a wrench on the crank pulley?
can you turn the engine over using a wrench on the crank pulley?
NEED PARTS INSTALLED? PM ME!
![Image](http://i453.photobucket.com/albums/qq253/projectzemx3/avator2.jpg)
![Image](http://i453.photobucket.com/albums/qq253/projectzemx3/avator2.jpg)
Re: problems
yes i can and i have also go the flywheel to turn with a pry bar
92 mx-3 gs,klde,spec stage II+ clutch,awr 88mounts, remaned axles,CAI,seven nipple ditsy, new alpine speakers,panasonic 7'' dvd deck ,10'' kicker l5, hei mod, removed air box. 17 sortmaxs 10 spoke white nexan n700 tires
now wrote off with a watermelon sized dent in the driver side quater panel
93 mx-3 gs black klze fully loaded
now wrote off with a watermelon sized dent in the driver side quater panel
93 mx-3 gs black klze fully loaded
- solo_ryder
- Senior Member
- Posts: 6289
- Joined: October 16th, 2004, 2:01 am
- Location: British Columbia
Re: problems
Your right it shouldn't, but I have heard of ppl using the auto flexplate spacer ontop of the mtx flywheel spacer causeing it to stick it to much, just makin sure :pprojectzemx3 wrote:it shouldnt matter if it was atx or mtx before.
can you turn the engine over using a wrench on the crank pulley?
Re: problems
ha ha i had that plate your talken about but i didnt use it.
92 mx-3 gs,klde,spec stage II+ clutch,awr 88mounts, remaned axles,CAI,seven nipple ditsy, new alpine speakers,panasonic 7'' dvd deck ,10'' kicker l5, hei mod, removed air box. 17 sortmaxs 10 spoke white nexan n700 tires
now wrote off with a watermelon sized dent in the driver side quater panel
93 mx-3 gs black klze fully loaded
now wrote off with a watermelon sized dent in the driver side quater panel
93 mx-3 gs black klze fully loaded
Re: problems
well i droped the tranny today and of course i missed one of the two spacers
. but its out and corrected but i ran into anther problem one of my holes for the flywheel has a 2 threads messed up and i cant get the bolt in and im not forcen it
so what size tap do i nedd anyone know?? i asked the guy at the parts counter of auto value but there dum.
![Embarassed :oops:](./images/smilies/icon_redface.gif)
![Confused :?](./images/smilies/icon_confused.gif)
so what size tap do i nedd anyone know?? i asked the guy at the parts counter of auto value but there dum.
92 mx-3 gs,klde,spec stage II+ clutch,awr 88mounts, remaned axles,CAI,seven nipple ditsy, new alpine speakers,panasonic 7'' dvd deck ,10'' kicker l5, hei mod, removed air box. 17 sortmaxs 10 spoke white nexan n700 tires
now wrote off with a watermelon sized dent in the driver side quater panel
93 mx-3 gs black klze fully loaded
now wrote off with a watermelon sized dent in the driver side quater panel
93 mx-3 gs black klze fully loaded
- umcamara
- Supporting Member
- Posts: 1892
- Joined: June 12th, 2007, 3:15 am
- antispam: No
- Location: Winnipeg, Manitoba, Canada
Re: problems
If you have a tap & die set, spin the bolt into different dies until you find the right size.
Or, if you have a set of calipers, measure the outer thread diameter on the bolt for the first number in the metric thread size. The thread pitch is determined by measuring how many millimeters the bolt advances after one complete revolution.
Or, if you have a set of calipers, measure the outer thread diameter on the bolt for the first number in the metric thread size. The thread pitch is determined by measuring how many millimeters the bolt advances after one complete revolution.